No printer driver needed. Just establish a Bluetooth connection between the PC and the PoGo, then send the file to the PoGo using Explorer. In Windows you can right click on the JPEG file and send to - bluetooth device.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it is communicating with your phone you are on a Blue Tooth connection. You most likely will have to hook up your computer by Blue Tooth as well. I don't know what type of printer you have but you may have an option to set up both types of connections but it will be in the printer menu under set up/wireless/network
Make sure the blue tooth adapter is set to "discoverable". Then open your blue tooth app and search for connections. You should be able to find it. After two minutes, if it does not find it, turn printer off, restart ipad. Try again. good luck
Go to the manufacturer's website and search for your printer. Check the specs and see if it has IR or bluetooth (BT) capability. If it has then you can connect it via IR or BT provided your laptop/PC has an IR/BT port built-in or a USB device having such capability.
Note that using IR may not be a good idea as it reuires the sensors to be aligned all the time or a print error will be generated. Better use USB/wired connection or use BT if possible. Also you will need proper drivers and software in each case. These can be found on manufacturer's website as well.
The blue tooth settings has tto be done to detect the printer on to the laptop. Open the blue tooth window and scan to detect , then identify and save/ lock. hence forth the printer will be detected and you can do the printing. It is also important tht there is no conflict from the PC when you are trying to do it at the same time. hence you will need to test with the PC and laptop on. Check this out. Good day .
insert installation cd adn perform add a device. or if your pritner is connected to bluetooth it will not scan. as blue tooth signal is not strong enough to scan from pritner to computer. it works on some but don't work on all blue tooth
I don't think your printer is equiped with a bluetooth device. You might try buying a standard usb bluetooth dongle and put it in the usb port on your printer. That might activate the bluetooth menu. That worked on my HP 6310AiO.
There would be no way to get the printer to install the bluetooth drivers to support and run the blue tooth USB. It would default to passing it to the PC connected to the printer for driver support and still require the printer to be hooked to the computer defeating the purpose.
You will need to have the ita drivers and have it where you do not need a secure conecsion and have the startup set to auto. Also make shure the printer is in descovery mode so that the computer can pick it up. Also make shure that the computer is in a good range from the printer so it can get a good conecsion.
click the my computer icon 2)click
properties and then click hardware n go to device manager. 3)uninstall
all usb ports and then scan for hardware changes 4)ur
pc will detect your printer and ask for printer drivers 5)re
load drivers and your pc will communicate with your printer 6)for
reloding install the cd follow the instructions on the screen and click next 7)restart
when the printer is loded.connect the wires and cords properly.