- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You must reset your PS3 in order to accept the new TV configuration.
If the video output settings on the PLAYSTATION3 do not match those of the cable or TV in use, there may be no picture. If the screen goes blank, turn off the system.
Then, with only the PLAYSTATION3 and the TV connected, touch the system's power button for more than 5 seconds to turn the system back on. The video output settings will automatically be reset to the standard resolution.
Hope this helps please remember to rate my response, thanks!
if you are trying ti use the standard PS3 cable going to the videoinputs on a tv the PS3 needs to be reset turn off the playstation by the switch hold the power button and turn the switch back on hold the button until it beeps this puts it back in standard mode, when the PS3 uses the hd cable it automaticallly sets to HD mode but fogets how to get back to standard mode
You Plasma TV is probably an HDTV, which means you need to change the settings on your Wii to HD. Just go to the Wii menu and modify the TV settings. If you don't want to do that, make sure you connect your RCA cables to the non-HD slots on your TV so that the yellow RCA cable is in the yellow slot and not the green HD slot.
have you checked your video and audio cord. have u tried to buy a new cord. maybe your audio and video cord is out. are you using a hd cord, or regular cord. is your tv have an hd outlet or just a regular tv that does not have hd privalages
If it was hooked to a flat screen it was most likely on high def. There is a switch on the connection to the tv to make it work on a regular defination tv. Just slide the switch over to regular and it should work. Hope this helps.
Well it might be working just fine. Personal preference of HD plays a great role in this. Try asking other people if they think it looks HD worthy. If the cords work just fine and are plugged in into the correct A/V jacks, then it could just be your personal preference on what HD is.