Question about Abit NF-M2S Motherboard
Hi i have an ABIT mobo model NF-M2S chipset MCP61 rev A3.
Currrently it is using bios ID:16 (m613z16) as descibed on the ABIT site and there are 3 updates available, so i downloaded the latest, bios ID:19 (m613z19)
then after making a floppy boot disc copied the unzipped files to the floppy wich includes ABITFAE.BAT AWDFLASH.EXE M613Z_19.BIN M613Z_19.TXT RUNME.BAT.
After a reboot jumped into the bios settings to change primary boot device to floppy drive,
Once booted from floppy and at a command prompt i typed in rumme.bat wich started the flash process and finnaly i was asked to "input file name",
Now in the "file name to program" box was m613z_19.bin wich i see as correct (but even if it wasnt i had no way of changing this as the keyboard would do nothing at all)
Then after 20 mins of beating it with a hammer i get a message "disk not ready" and "the program files part number does not match with your system!" any help would be much appreciated and thanks in advance.
Oh and full current bios ID is: NF-MCP61-6A61KE11C-16 dated 5/16/07
Try making a disk again - use a brand new disk and check it for errors.
Posted on Feb 15, 2009
Tips for a great answer:
Feb 28, 2011 | Motherboards
Aug 19, 2010 | Abit NF-M2 nView Motherboard
Jun 07, 2010 | Abit NF-M2 nView Motherboard
Jan 15, 2010 | Abit NF-M2S Motherboard
Jan 07, 2009 | Abit NF-M2SV Socket AM2/ MCP61S/ DDR2-800/...
Nov 15, 2008 | Abit NF-M2S Motherboard
May 08, 2008 | Abit NF-M2S Motherboard
786 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: