Question about Microsoft Windows Server Standard 2003 for PC

3 Answers

Getting error while joining any host(winxp or other os) to domain

"Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\WINDOWS\debug\dcdiag.txt.
The domain name MPTSWADA might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain MPTSWADA:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.MPTSWADA
Common causes of this error include the following:
- The DNS SRV record is not registered in DNS.
- One or more of the following zones do not include delegation to its child zone:
MPTSWADA
. (the root zone)
For information about correcting this problem, click Help."
if you required detail mail your id so i can send the jpg attachement for the same error.
While joining to any host to domain when i am providing the domain name as mptswada.com that time the above error showing, instead if I provide only MPTSWADA then its ask for administrator username and password to join in domain.
pls give me the solution to solve this error.

i you required the error snapshot pls provide your email so i can send the same.

pls mail me at shambo_35@rediffmail.com for any solution.

pls go thru this url i got the solution but i am frightending to do the DNS Flush, pls suggest me the step by visiting this url
http://techrepublic.com.com/5208-11184-0.html?forumID=39&threadID=201502&tag=rbxccnbdisc1

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 135 Answers

Hi irudayaraj, you are right,and one more for checking use this http://www.whoisxy.com/ site ,really it is goos and free site.

Posted on Apr 15, 2010

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

Aventhika's guidelines is good... thanks avanthika...

Posted on Sep 01, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Step 1.

check is dns ip address correct

step 2

check dns ip is pinging with your system




Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to join a domain on microsoft windows XP professional but I need someone to tell me a domain I can join on my computer


Hello Steve, go to a pc which is already connected to domain. Right click on my computer icon of the pc and select properties. You will see it there. Or else type echo %LOGONSERVER%. This is the easiest way for you now. Or else you can search internet for your answer. Good Luck. Hope your system administrator returns soon if all fails :)

Apr 16, 2015 | Microsoft Windows XP Professional

1 Answer

What is the blue screen errors? Why will they come? What should we do if we get those errors? What will happen if the error will come?


Hello, I understand you are concerned with blue screen errors. To keep it simple, Blue screen errors appear majority due to corrupt drivers crashing, or services suddenly stop running. This is generally due to a virus, but can be as simple as a corrupt driver.

I understand that things can go wrong and issues can occur that are out of your control. As long as you keep your computer information updated as much as possible you shouldn't run into any issues.

Now if you are running into an issue now with a bluescreen, a few proactive things you can do, is boot into safe mode and run some security scans as well update the PC with networking.

Knowledge is power
Jon Justiniano
Customer Service rep with:
Web Hosting Dedicated Server Hosting Domains AIT com

Nov 05, 2014 | ErrorExpert Computers & Internet

2 Answers

Cause of user profile not loading


The question is:

What causes a user profile not to be loaded in Windows domain based network?

the answer is:
there are probably 3 broad reasons for this,
1. the user corrupted their profile somehow, such as shutting down without logging off (hard power off)
2. the connection to the domain was lost ungracefully, and offline information was not copied entirely, causing a mismatch of some encrypted profile data, (effectingly corrupting again) and preventing the logon.
3. an unknown event took place between the last time the user sucessfully logged on, and this time where the profile is now not loading. this could be hardware related (faulty Hard disk), RAM parity errors( bad memory), a change to the user profile SID details on the domain controller or other domain change.

Usually the cause is not so much a problem, unless it consistantly reoccurs.

Fixing it however, in XP is fairly easy.
with an account with domain admin rights, just navigate to the UNC path "\\computername\c$\documents and settings" - note the name of the folder/user affected, and just .old their profile folder.
example, username is Philip. - you see in their c:\documents and settings\ folder the folder called Philip, rename it to philip.old or something else.

You have to ensure this is done while the user is logged off, as files in this folder will be in use otherwise. potentially useful to reboot the computer before navigating to the profile folder.

Jul 11, 2010 | Microsoft Windows XP Professional

4 Answers

I dont know what is domain


A Microsoft Windows Active Directory Domain is a directory service for a computer network. Think of it like a phonebook for all your companies computers, users, and printers to name a few. Active Directory provides a central authentication point for all users/computers in the building and controls network policies. This makes network management for multiple computers and users MUCH easier.

For more information, see Microsoft's Official Active Directory site.

Mar 07, 2009 | Microsoft Windows Server Standard 2003 for...

1 Answer

RECOVER FIRST DNS


Is there a running Domain Controller present? If so DNS info is often stored in Active Directory (A.D. Inegrated DNS Zone).  If this is the case you can just connect a server to the network, join the domian (verify DNS settings in TCI/IP config is pointing to Domain Controller) and then installm DNS from Add/Remove windows components.  Zone data should replicate from AD to new DNS server, to verify open DNS console and look for resource records relevent to the domain.

Dec 17, 2008 | Microsoft Windows Server Standard 2003 for...

1 Answer

Vista to join domain


No. Only Business and Ultimate can join to a domain. You can use the Windows Anytime Upgrade to jump to Vista Business upgrade later down the road.

Jul 23, 2008 | Microsoft Computers & Internet

1 Answer

Title


hi,
the difference between workgroup and the domain is
workgroup is a peer to peer network, no centralised administration and security is less.
domain is a client/ server network, administration will be done by domain and is more secure.



ramana
sys admin

Jul 02, 2008 | Microsoft Windows Server Standard 2003 for...

2 Answers

First timer installing a Server network


Well i'm just going to start where i would start. First off, how do your machines on the network get their IP? DHCP?

Is the first listed DNS server the AD server? 192.168.1.1?

Also make sure your using case sensitive domain information when your trying to connect. It is rare but i have had that be my trouble.

I have remote software available and would love to help you fix this hands on if possible. I live for network problems ;)

Sep 29, 2007 | Microsoft Windows Server Standard 2003 for...

Not finding what you are looking for?
Microsoft Windows Server Standard 2003 for PC Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2635 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...