Question about Patton Electric Patton PUH680-U Electric Utility Heater 1500-Watt

Open Question

Eden pure heater-bad smell. cannot use

I bought an Eden Pure Signature heater for $484.00! It was touted as "tops"! By day 2, it was back in the box! DO NOT BUY THESE HEATERS! The smell was very bad, and would not stop! The company will charge you big bucks for returning it! When I took it to the UPS store, it was the 3rd on that day, and I saw the other 2 identical boxes! Pretty bad for a city with only 900 people! I can only imagine how many are being returned! These expensive heaters are made in CHINA! Need I saw more?

Posted by on


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: When the alarm on the Patton Electric Heater sounds, whay does one do to fix that?

This heater was the determined cause of my total loss house fire. I thought the company would atleast help me find some where else to live, they seem to care. But, as of lately they are doing nothing.
I am told this heater-(prh11- 2008 model- purchased at walmart for about $27.00)
- Had wiring that wasn't up to standards
-1/10,000 units cause fires
-something wrong with the heating element-stops working
- wouldn't stand level
-heating coils
-fires like mine have happened to a few other people
This came directly from a person at Jarden corporation(aka patton-sunbeam)

Posted on Sep 08, 2009

  • 207 Answers

SOURCE: eden pure heater starts to heat then elements shut

yes u have overheatsensors that shut the strips down if they get too hot these may be going bad and getting weak and shutting off prematurely

Posted on Feb 26, 2010

  • 1 Answer

SOURCE: I have an eden pure xl model 1000xl. it is not

The bulbs/ elements for this xl 1000 are very easy to install. Not always too easy to find in stock though. PAY VERY CLOSE ATTENTION to the way the wires are ATTACHED! They MUST be reconnected in the EXACT way they were removed. BUT, just in case you forgot to look, I have pictures of the terminal blocks. Hope this is a help as there are no other diagrams or pictures that I have found on the net! Good Luck!


Posted on Jan 22, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I fix Eden Pure Heater? It goes on and off intermittently, mostly off.

You need to clean the filters in the back of the unit. It is not receiving enough air flow. They just snap out and wash the little foam filter and replace it.

Mar 10, 2015 | Eden Heating & Cooling

1 Answer

Why does my Eden Pure Gen 3 heater blow only warm air?

They have 3 heating elements. Perhaps one or more have burned out. They cost about $32 each.

Aug 31, 2014 | No Clove Leaf Pure Essential Oil 15ml, By...

1 Answer

Ew6507l - nowhere near warm enough

only made for 400 to 600 sq feet try Eden pure heater 1500 watts than cover 1000 sq feet the oil fill heater might have a switch 600 to 1500 watt there r usually a high and low to them good luck

Dec 11, 2013 | DeLonghi 6507L Oil Filled Radiator Heater

1 Answer

Test the element in eden pure

Copy following link for testing elements
Multimeter required

Each element should have Volts and watts printed on end.
Ohm reading should be fairly close, or replace element

Apr 21, 2013 | Water Heaters

1 Answer

Eden pure starts blowing hot air and then turns cold

I recently fixed this issue for a family member on this exact model, the same issue, it would heat fine for 15 minutes and then cold blowing air would follow afterwards non stop, and when we powered down the unit and restarted it, it did the same exact thing. ( What worked for me ) was ordering a new " Thermostat " which is a white rectangle looking plastic thing with 2 blue wires coming out of it, you can find You-Tube video's showing you how to remove the Eden-pure gen3 cover housing easily, my total cost of this do it yourself repair was just under $20 as of 10/10/14 your cost could vary depending on different factors.
1st...unplug the unit....duh ! lol
Once the housing is removed, look at the top of the unit and locate the 2 blue wires coming out near the front, remove the 2 top screws holding in the thermostat, gently pull out the old thermostat but don't disconnect any blue wires yet, put the new thermostat in facing the exact same way as the old one, re-tighten the 2 screws, next follow one blue wire ( One is longer than the other ) to its location on the block, determine if its the shorter or longer wire, disconnect just 1 wire with a Phillips screw driver, and replace it with the like sized blue wire from the new thermostat, tighten but not over tight ! next do the same for the next blue wire on block.
After thermostat is secure and wiring is secure, put the cover and panels back together......and plug it in and test it again....... Hope this works for you as it did for me.
Good Luck !

Oct 12, 2012 | EDENPURE MINT A3705 Infrared Remote...

1 Answer

Need operational manual for eden pure G7

You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa

Jan 06, 2012 | Eden Heating & Cooling

1 Answer

Eden pure heater starts to heat then elements shut off i replaced thermostat and heat sensor any other suggestions what to try next

yes u have overheatsensors that shut the strips down if they get too hot these may be going bad and getting weak and shutting off prematurely

Feb 20, 2010 | Reddy Heater R70 Portable Forced Air Space...

Not finding what you are looking for?
Patton Electric Patton PUH680-U Electric Utility Heater 1500-Watt Logo

Related Topics:

846 people viewed this question

Ask a Question

Usually answered in minutes!

Top Patton Electric Heating & Cooling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers


Level 1 Expert

36 Answers

Are you a Patton Electric Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides