IT was working fine earlier today, and when I went to eject the CD, it opens and refuses to give the CD. When I move the deck manually higher up and try to eject, I get the same problem. Also there is no sound now.
use the manual reset on the face plate. its located to the right of the rotory knob. you will need a pen to push it in. then remove the face plate and reseat it.
why do you need to use a sd card to get on the internet on the dsi.and where can you get a cheap sd...
(More)
WHY DO YOU NEED TO USE A SD CARD TO GET ON THE INTERNET ON THE DSI.AND WHERE CAN YOU GET A CHEAP SD CARD FOR $6.00. PLEASE WRITE BACK SOON. IN LIKE 6 MINUTES.
needs to installed in 2004 chevy cavalier and hooked up to ipod for power and play through stereo. ...
(More)
needs to installed in 2004 chevy cavalier and hooked up to ipod for power and play through stereo. I already have the older version in my car now
My sub output RCA is not sending a signal to my amplifier. I have an alpine CDA 9831 head unit and I...
(More)
My sub output RCA is not sending a signal to my amplifier. I have an alpine CDA 9831 head unit and I cannot find the function to turn the sub RCA on. Everything is wired correctly, the amplifier is powering up, RCA connection is using high end, low interference wiring, there just appears to be no signal feed. Second amplifier running mid's and highs is recieving signals fine, all speakers connected to that amplifier are running perfectly, it is just the sub's that are not kicking. Could you please explain how I turn that signal feed on?