Question about Yamaha HTR-5650 Receiver

1 Answer

TV Audio out to HRT 5650 receiver

I am trying to find the input port on the back of the 5650 receiver where I can attach the audio out (red/white) cables from my TV in order to have the sound run to my speakers. I have a CD player and DVD player already attached without a problem, but I can't get the sound from the TV to come through the speakers.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

You may need to enable the fixed audio output line level from the TV. Some TV`s require you to enter the AUDIO menu/setup selection on the TV remote controller, and then enable the AUDIO OUTPUT Jacks, this will turn off the TV built in speakers and engage the audio RCA Jacks.

Posted on Feb 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hitachi le55a6r9a sound but no picture


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board . In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
http://electro-medical.blogspot.com/

Jan 23, 2017 | Hitachi Televison & Video

1 Answer

I have the 3 RCA red, yellow, white cables on back of dvd and to tv. Video only plays when I select video 1 under the input. When when I select video 3 only sound and no video. What else can I try?


Sounds like from the symptoms that you have plugged the white and red cables into AV3 input on the back of the Teleivsion and plugged the yellow cable into AV1 on the back of the Television.
Check the cables are all plugged into AV1 input ports on the back of the Television. Red and White go into the Audio inputs and Yellow goes in the video input. Also make sure you have not plugged cables into component inputs on television look for AV1 in on back of Television .

Mar 08, 2015 | RCA Televison & Video

2 Answers

How do I get rid of a no signal sign on my tv


You may have the wrong input source selected. There are a number of different source connections on the back of today's TV sets. Using the remote's SOURCE button, cycle through the different inputs until you find the one that your input device is attached to. It is common for users to inadvertently cycle off the correct input when pushing remote buttons.

Mar 02, 2015 | Televison & Video

1 Answer

Optical audio


are you sure what your plugging them into on the TV is an output? most of the red white yellow jacks on TV's are inputs not outputs. also on same thing on the receiver make sure its an input not output

Aug 03, 2013 | Sony STR-DE485 Receiver

1 Answer

How to hook up tv to onkyo txds575 receiver...


Red and white plug into the component audio inputs (red is right and white is left) and yellow plugs into component video input

Jan 27, 2013 | Onkyo TX-DS575 Receiver

1 Answer

I am trying to hook my wii to my Onkyo receiver. The Plasma is a Pioneer and you can't hook the Wii directly to it. I have the yellow, white, red cable that comes with the Wii.


Hello Julie

Thank you for using Fixya!!

OK, this is actually very easy once you get the hang of it:

The Yellow, Red and white cable you have, is actually the Video(Yellow) and the 2 stereo Audio cables(Red and White).

lock123_11.jpg

Now, the Yellow wire goes into the video port on the gaming unit, and into the Video input port on the TV itself. This is usually The AV channel's port.

The white and Red cable goes into the audio port on the gaming console, and into the audio in or AUX port on the receiver.

This should do the trick, but you will need to remember the following:

Once you want to use the gaming device, you should set the TV on the AV channel, n=and the receiver on the AUX channel.

Feel free to let me know if yu need any further assistance.

Kind regards
Lock123

Feb 20, 2011 | Onkyo TX-SR608 Receiver

1 Answer

Im trying to find an audio output for my tv or a headphone jack but with so many things on the tv i cant find it.. help


There should be two RCA jacks on the back for left and right audio outputs, white and red respectively, if it has stereo out. Connect these outputs to a stereo receiver or amplifier into an auxiliary port or TV audio input via a red and white RCA cable.

Nov 10, 2010 | Televison & Video

1 Answer

I have an older Samsung surround sound kit that does not have optical or HDMI connections. I cannot get the sound for my PS3 or the TV or anything else connected to the TV to come through the receiver and...


Most TV's have a MONITOR OUT connections, sometimes called audio out.

This may be either analogue (RED / WHITE) or digital (optical or coax) simply run these back to the receiver's input and you should be good. Many TV you have to go into the menu and disable your TV speakers and enable audio output.

Cheers,

Kevin

Feb 10, 2010 | Samsung Audio Players & Recorders

1 Answer

I have a dvd player that I am trying to hook up to a sharp tv model number 25L-M100B. This tv don't have the necessary ports inthe back to plug dvd or anything up to it. It does have 2 in the front of


Hook the dvd player up to the front inputs usually a yellow and a red or possibly a yellow red and white depending if the TV is stereo or not.

Then on your remote, it the INPUT button and take it to "VIDEO 1" while your dvd player is on and you should get a picture.

Make sure not to mix the cable colors.
Yellow is video
White Audio
Red Audio
A lot of times there is only either white or red and not both. This is just Mono sound, it works, just not "stereo" sound.

Jun 01, 2009 | Televison & Video

Not finding what you are looking for?
Yamaha HTR-5650 Receiver Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4946 Answers

The Knight
The Knight

Level 3 Expert

73159 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Yamaha Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...