Question about Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Show me a video please
This happens when the filter on the inside of the lid for the dirty water tank is pushed all of the way up. You need to leave a 1/4 in. gap from the top to the top of the filter.
Posted on Jan 10, 2008
SOURCE: Hoover Steam Vac Spin Scrub
Remove the brush block, is the shaft on it or broken off. Replace the block if broken off. Turn unit over, with brush block removed, handle tilted back, is the square hole turning, if not then the turbine is bad, this is what turns the brushes.
Posted on Sep 01, 2008
There is a plastic cover over the spinner indicator. If you take the plastic cover off there is also a little filter in that area (almost like the spinner is on the floor and the filter is on the wall). If you clean this filter it may start working again. I had the same problem before and it worked for me. I found the info in the user's manual for my model. Hope this works for you as well.
Posted on Sep 04, 2009
Tips for a great answer:
Nov 29, 2015 | Hoover Vacuums
Aug 28, 2014 | Hoover SteamVac F5914-900 SpinScrub...
Jul 15, 2012 | Hoover SteamVac Carpet/Upholstery Deep...
Oct 21, 2010 | Hoover SteamVac Carpet/Upholstery Deep...
Dec 29, 2009 | Vacuums
Nov 28, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Jul 15, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Sep 18, 2008 | Hoover F5906-900 Upright Steam Vacuum
141 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: