- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
go to store that sells car decks and look for a wiring harness for ur car its about $7 mybe and prettymuch match the colors on ur deck to the harness and then pull ur old deck out and pull the harness from the back the back of that deck and plug that into the wire harness u just bought and hook up the antenna for radio andput the deck into the dash the wire harness should also come with so directions too just in case
The red wire on DEH-P3600 should have a tag on it that labels it as accessory. When wire harness is plugged into unit and you are looking at it from back the red wire should be on left of yellow wire right next to it with no open space between the two. Hope this helps!
All name brand radios have a standardized color codes coming off the harness.
Yellow- Constant Black- Ground Red- Switch power Blue- Antenna Blue/white- Amp turn on White- Left front + White/black- Left front - Gray- Right front + Gray/white- Right front- Green- Left rear side Purple- Right rear side.......the black stripes are your negative speaker outputs.
No need to guess what wires go where. Buy a wiring harness for your specific year, make and model.
You make connections from your pioneer harness which are all marked, to the Harness you will purchase for your car. They cost about $20 and can be purchased at most autopart stores, or major electronic retailers.
Once you make the connections from the pioneer harness to the harness specific for your car, simply unplug your factory radio and plug in your newly wired one.
On your Alero, the 12V constant wire is ORANGE and should connect to the YELLOW wire coming from the DEH-2300 wiring harness. 12V switched on your Alero is YELLOW and should be connected to RED coming from the DEH-2300.
You need to get an installation kit that also has the universal wiring harness to connect to the factory harness in the car. That way you only need to match the wire colors of the Pioneer harness to the wire colors of the universal harness and made good connections and insulate those connections. Then the Pioneer harness plugs into the Pioneer radio and the universal harness plugs into the factory harness in the car.
Let me know if this helps, or if you need more help.
http://cgi.ebay.com/PIONEER-WIRE-HARNESS-DEH-P8400MP-DEH-P8600MP-DEH-P960MP_W0QQitemZ190037675247QQihZ009QQcategoryZ39752QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting ------ copy and paste this. i hope this is what your looking for.