Question about Philips J44414

1 Answer

Camera cannot find video capture filter

I uninstalled it and then installed it back again and connected camera after the softwear it still cannot create video capture filter

Posted by on

  • lovesick1967 Feb 16, 2009

    ive installed the dics and then plugged camera in but still not getting video what am i doing wrong


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found out that in the "devices" option i checked" webcam basic" instead of "I catch (VI)PC camera"

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Usb camera 168 pc softwear

1st You download Webcam Driver.
Usb camera 168 pc softwear
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Feb 15, 2013 | QPS QSIPBL2 Network Camera

2 Answers

I dont know how to install my new lifecam !

Set Up and Use the VX-3000 personal web camera
  • 1 Install the software using the included CD and plug the LifeCam into a free USB port. For desktop use, place the LifeCam on a clear spot on your desk that's free of other objects, including cables. The camera should not be more than an arm's length away from you. For LCD (or similar object) use, push the center part of the camera's base upward, place the camera on the LCD and close the base around the monitor to secure it.
  • 2 Open the device software by clicking the Microsoft LifeCam icon on your Windows desktop. If no such icon exists on your Windows desktop, click "Start," click "All Programs" and locate the Microsoft LifeCam program in the list of programs there. After launching the LifeCam program, look at the image that appears. If necessary, adjust the camera to more precisely reflect your appearance. For best results, try to center the camera image on your head and shoulders.
  • 3 Click the video camera icon on the bottom panel of the LifeCam program to begin video capture. Video will begin recording, and you will see a "Recording Video" message beneath the live video image. To stop recording, press the same icon (the icon will have a red square with a blue background during recording).
  • 4 To begin audio capture, click the microphone icon on the bottom panel. To stop the audio recording, click the same icon (again, it will have a red square with a blue background during recording). To snap a photo, click the camera icon on the bottom panel.
  • 5 Access any of your captured video, audio or image files by clicking the folder on the bottom panel. The VX-3000 also provides the ability to edit video or image files using supported software. After snapping a photo or capturing video, click the "Edit" icon that appears beneath the thumbnail of the captured content.

  • Oct 09, 2010 | Microsoft LifeCam VX-3000 Web Camera

    1 Answer

    Plugged in web cam and it is saying no video capture capture device

    Did you install the software for the camera?
    Was the installation successful?
    Did the camera ever work before?
    You need to explain in more detail this failure.
    The main reason why a device fails to work after having worked in the past is a corrupt driver file. Follow these steps to try to fix this problem:
    1) Go to the Control Panel->Device Manager window and select your camera from the listed devices on the right hand pane.
    2) Right click your mouse and on the ensuing menu select Uninstall.
    3) Reboot your machine.
    If the driver files are Ok, the next time Windows starts it will detect your camera and will install the driver. Should it fail to install it, it's because the file is either corrupt or missing.
    4) Go to Control Panel and select Add/Remove Programs (XP) or Programs->Uninstall Program (Vista) and select your camera software installation. Upon removal...
    5) Reboot your machine.
    6) Load the disk that came with your camera and try installing the software from this source, as though it's the first time you're doing it.
    If the installation goes without a hitch, then your camera software will run prompting you for certain things, like testing your audio and video settings, etc.
    Good luck!

    Aug 17, 2009 | GE Webcams

    2 Answers

    NO VIDEO CAPTURE HARDWARE make uninstall the driver then after that reboot the CPU ant then unplug the camera & install again the software driver..followed again the instruction..install programs A4 tech then reboot again the CPU.if the CPU back on the desktop icon plug in the A4tech web cam then u see found new hardware.that's it...Thanks

    May 09, 2009 | A4tech PK-635 Webcam

    3 Answers

    Ezonic usb camera ez622 s120 i need the softwear

    HP Basic Starter Camera - this is what Windows XP found and installed - works !


    Apr 04, 2009 | Ezonics EZCam PRO Webcam

    1 Answer

    Cam won't work anymore!

    You may need drivers for the Web Cam If you have these install them or if they have been installed install them again the reboot the computer and the drivers should install properly if that does not work when you reboot un plug the Web Cam then plug back in again

    Jan 11, 2009 | Creative Labs PD1001 Webcam

    1 Answer

    Camera capture screen is black (blank)

    Normal 0 Try this:

    In some cases, the preview capture may not appear only a black view.
    To fix this:
    - Unplug the web cam and plug it back in.
    - Or -

    Lower the video resolution of the.
    Hope this helps. Bud

    Jun 24, 2008 | Logitech QuickCam Communicate STX Personal...

    2 Answers

    Old veo webcam no softwear

    select your camera and this will give you a list of possible drivers

    Jun 17, 2008 | Veo Connect Webcam

    1 Answer

    Philips webcam

    re-install the software. uninstall the camera. do everything over again.

    Jan 14, 2008 | Philips J44414

    1 Answer

    Pc camera install

    i think maybe uninstalling the software and removing the camera from its current usb port, then reinstalling and connecting to a different usb port may be the answer.

    May 16, 2007 | Philips J44414

    Not finding what you are looking for?
    Philips J44414 Logo

    Related Topics:

    532 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Philips Webcams Experts

    micky dee

    Level 3 Expert

    2630 Answers

    Larry Maranto

    Level 2 Expert

    197 Answers

    Barbat Nae
    Barbat Nae

    Level 3 Expert

    508 Answers

    Are you a Philips Webcam Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides