PROGRAMMING DIRECTV REMOTE

Go here:
How to Program DIRECTV Remote Control DIRECTV Support

How to Program DIRECTV Remote Control DIRECTV Support

Hello! My name is Becki, with DISH Network. Programming the remote to the TV is a pretty easy process. I have given some codes that should work to program the remote. If not, please let me know!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

566
828
824

Becki Barned
DISH Network Customer Service
[email protected]

I can help you with your Toshiba TV & DirecTV remote control.

To get your TV setup so that you can view your DirecTV on it, I recommend you program your DirecTV remote to control your TV and then use the DirecTV remote to change the input of your TV to view the DirecTV programming.

You can choose between searching for the control code and
entering a code from the Toshiba TV list.

This is a list of all the Toshiba TV control codes for DIrecTV remote controls:

11524, 10154, 10156, 11256,
10060, 12006, 11945, 11936,
11935, 11918, 11704, 11656,
11635, 11369, 11356, 11343,
11325, 11306, 11156, 10845,
10832, 10822, 10650, 10149,
10148, 10036, 11971

I hope that helps.
_________________________________________
DirecTV Remote Control Code List Download
DirecTV Remote Control Manual Download
DirecTV Remote Control Code Entry
DirecTV Remote Control Code Search
DirecTV Remote Control Onscreen Setup

Press and "HOLD" CODE SEARCH.
2- Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
3- Enter the three digit code from the TV codes below

Philips 006,007,010,011,013,016,033,035

4- Release CODE SEARCH. 6- With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists

Hope this Helps you out
Cheers Little Dish Fitter

I just programmed mine by using my direct tv remote...
Go to MENU on the direct tv remote
Then highlight HELP & SETTING and press SELECT.
Press SELECT on Remote in the left menu.
Simply follow the onscreen instructions to program your remote. IT IS IMPORTANT TO MAKE SURE YOU HOLD ON AND SEE THE GREEN LIGHT ON THE DIRECT TV REMOTE FLASH TWICE, otherwise it won't work....which is what I think is happening in your case. Good luck.

I NEED THE THREE DIGET CODE FOR MBR3447 REMOTE

the remote has too small buttons. Is there a universal remote available with larger buttons ?????

see page 13 of this manual
http://www.directv.com/learn/pdf/System_Manuals/Philips/Philips_DSX5500_5540.pdf

Trutech is a daewoo product. I used the code 10451 also try 11661, 10092, 10672, 10019, or 10623. hope this helps.

go to menu
setup
setup again
remote
tv
brand
the satelite receiver will tell you the procedure for programing the remote