Question about Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Open Question

Eureka Boss Capture - bagless upright - height adjustment knob

Eureka Boss Capture - bagless upright - green - you just offered one solution. Okay, now another issue - by husband is putting it back together and can't get the height adjustment knob to work - HELP!

Posted by on

4 Suggested Answers

  • 134 Answers

SOURCE: Eureka Boss Capture - bagless upright - green

HI
are you sure its the height adjuster?
More likely to be the bearings in the brush.
Rob

Posted on Feb 14, 2009

the recycler
  • 22 Answers

SOURCE: I need hepa filter specification for eureka

http://www.eureka.com/servlet/FindOwnersGuide

"You will find your model number on a metallic silver-colored rating plate. It’s usually located on the back or bottom of the cleaner. Here is an example of a rating plate: You will find your model number on a metallic silver-colored rating plate. It’s usually located on the back or bottom of the cleaner."

"Not all accessories, supplies, owner's guides or Eureka program details are available online. If you can't find what you're looking for, you can call 1-800-282-2886 for assistance. Our Service Representatives are available Monday through Friday, 8 a.m. to 7:30 p.m. Central Time, and Saturday and Sunday, 10 a.m. to 6:30 p.m. Central Time. Our Service Representatives will need your vacuum's model number, so please have it ready when you call."

Posted on Feb 25, 2009

  • 1 Answer

SOURCE: Eureka Boss Capture - bagless upright - green

Eureka Boss Capture - bagless upright NOISE PROBLEM FIXXED!!!
I had the same noise problem as everyone else here and found no solutions on the web. i took the thing apart a few different times to no avail. i read here that it could possibly be the brush bearings but i didn't believe that was the problem. i removed the brush and spun the bearings in my hand and they seemed to be ok, i didnt feel or hear anything wrong. i looked around the house for something to use to lubricate the bearings but i found nothing. i then remembered the all purpose wonder tool that is olive oil. i carefully added some to brush bearings on both sides and spun them in my hand a little bit and put everything back together. Voala! The vacuum now runs as quiet as the day i first bought it. i no longer feel ashamed to vacuum at 11pm and my neighbors can get some sleep :D

Posted on Feb 07, 2010

dcramer531
  • 1654 Answers

SOURCE: Eureka Boss Capture 8803AVZ Bagless Upright Vacuum

First you need to checkl and make sure the roller brush is not jammed up and the belts is not slipping due to the brush not turning

Posted on Apr 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need brush bar and bearings


The brush roll you need has been discontinued. I have one in stock at this time. ($49.99) Please contact me if you want it.

May 12, 2014 | Eureka 8853AVZ Capture Plus Pet Lover...

1 Answer

Still dont know hot to get height adjuster knob to work. tried handle all the way back n lay on side solution that was offered. the plate has a permanent place to sit. hows it possible to bring knob


Hey, not having a working height adjustment can be a bear. Lock the vacuum in the upright position, change the knob to desired setting, and recline the handle for adjustment to occur.

If you are still having difficulty, you may want to have your vacuum inspected by a Qualified Technician at one of our Authorized Service Centers. Here's a quick link to assist you in locating one.

http://www.bissell.com/service-centers/?cid=ccsocial

Jan 03, 2013 | Bissell 6594 PowerForce Bagless Upright...

1 Answer

Screeching noise from eureka bagless the boss 4d


replace beater bar belt, check and insure beater bare rotates freely with belt removed.

May 19, 2012 | Eureka 5849A Boss Bagless Upright Cyclonic...

1 Answer

Eureka Boss Capture 8803AVZ Bagless Upright Vacuum smells like it is burning


First you need to checkl and make sure the roller brush is not jammed up and the belts is not slipping due to the brush not turning

Apr 30, 2011 | Eureka Boss Capture 8803AVZ Bagless...

1 Answer

Behind the brushs, there appears to be a plastic part (tube) that is broken. Is this common and/or easily repaired?"


The tube you see, is just the underside of your height adjustment knob. It may look jagged, but it is not broken.

Sep 17, 2010 | Eureka 5856BVZ Boss Bagless Upright...

1 Answer

Height adjustment won't work


The height adjustment for the vacuum will only work when the handle is in the released position. The knob will turn easily when the handle is locked upright, and when released you should feel a fair amount of resistance.

Aug 30, 2009 | Eureka 4700A Maxima Bagless Upright Vacuum

1 Answer

My wife's Eureka 5855 Boss Bagless Wide Track stopped running


its probably something in the motor. you may have to replace the motor which could cost around $50.

Apr 15, 2009 | Eureka 5849A Boss Bagless Upright Cyclonic...

2 Answers

Eureka Boss Capture - bagless upright - green


HI
are you sure its the height adjuster?
More likely to be the bearings in the brush.
Rob

Feb 14, 2009 | Hoover U6446-900 WindTunnel Bagged Upright...

1 Answer

Eureka 5849A Boss bagless upright


remove belt to brush roll and see if noise persists. if it stops, you probably need a brush roll. at least doing this will narrow down the fault area

Mar 26, 2007 | Eureka 5849A Boss Bagless Upright Cyclonic...

Not finding what you are looking for?
Hoover U6446-900 WindTunnel Bagged Upright Vacuum Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Roger Potts

Level 3 Expert

694 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...