Question about Webcams

1 Answer

Driver problem I'm looking for the drivers for the GE ultra cam 98073 rev. 2 i've been having zero luck.

Posted by on

  • rabiddove Feb 14, 2009

    windows XP ! i forgot to put it in!

  • rabiddove Feb 14, 2009

    sorry... i thought that i was supposed to rate how helpful the solution was.... thank you for trying!

    oh in case anyone else finds this question i found the answer... (going to try it now )

    found here :http://www.computing.net/answers/drivers...

    Thanks so much for being here!
    I should have simply bought a
    new camera, well worth it even if my time was only worth Minimum Wage!
    Spent the entire afternoon trying to get this working! Finally
    successful only after finding a very old thread here (too old to reply
    to)!
    Family member hands me a web cam with a GE logo on it, no
    other markings anywhere... I started at GE, soon concluded they have
    nothing to do with this cam. Googling around it appeared the cam was
    manufactured by Jasco Products, their drivers didn't work. Tried a
    couple different driver sites, those drivers didn't work either. I
    found an image of this cam
    http://www.samtack.com/chSupport_Folder/...
    which provided a model number for more fruitful searching (since the
    driver found there didn't work either...). Found a Microsoft document
    listing that model as certified for XP, but the listed vendor (Sonix
    Technology Co. Ltd.) only makes the controller chips. No clue which
    chip without opening the cam, downloaded a few of their drivers (and
    found I was downloading some of the same drivers obtained earlier a
    third time!).
    Well the point of all this is that after an all-day
    Google Adventure / Learning Experience, I found that the "Logitech
    WC-10" may be the same camera as my "GE" - so I went to the Logitech
    site, downloaded the WC-10 driver, installed it, and LO AND BEHOLD THE
    CAMERA WORKS!!
    So I guess the conclusion I have come to is that I
    should check out computing.net early in a problem-solving session!
    Thanks again for getting me out of this one!
    -Bob



×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 214 Answers
  • dirinda89
    dirinda89 Feb 14, 2009

    I'm sorry you felt the need to bust me down with that low rating, I was doing my best to help you with the limited info I had available.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to download the driver


Driver: http://www.jascoproducts.com/support/download-files/98063.zip

Instructions: http://www.jascoproducts.com/support/download-files/98063.pdf

Unplug the cam, uninstall any cam software you've got, reboot, install the driver, then plug the cam in.

Jun 14, 2011 | GE EasyCam Webcam

1 Answer

Telecharger driver de cam model no98067 minicam pro rev.4 gratuit


Here is the driver i have stored at Boxnet. Thank you in advance for your approval.
JUST CLICK THE LINK BELOW TO DOWNLOAD THE DRIVER

http://www.box.net/shared/15kiz0muoy

Dec 24, 2010 | GE MiniCam Pro HO98067 Webcam

1 Answer

I have a web cam and lost the the disc for 98650 rev.1 cif cmos pc camera


You can download your webacam driver from here
1)first download driver from above link
2)run downloaded file
3)follow installing instructions and install
4)restart PC
OK done

Dec 09, 2010 | GE EasyCam Webcam

1 Answer

Hi im deployed to romania and the driver for my ge easycam model 98063 rev. 3 somehow got erased and i cant find the driver anywhere...can u help?


The drivers for GE EasyCam Web cams can be downloaded from the link below.

http://www.jascoproducts.com/support/software-downloads.asp

Robert from Blitware

Jul 03, 2010 | GE EasyCam Webcam

1 Answer

Driver for GE Ultra Cam Rev. 2 model 98073


Try here

http://jascoasia.com/support/software-downloads.asp#pccams

If your cam is not listed contact customer support.

May 27, 2010 | Logitech Webcam

1 Answer

No driver for windows vista for ge minicam pro 98067 rev 2


MODEL N 98067 / MINICAN PRO Rev 2 / general electric

Dec 05, 2008 | GE EasyCam Webcam

1 Answer

WebCam Driver Help :)


On this page read the two technical FAQs at the bottom of the page -- the first is an error that may occur after install and may need fixed. The second concerns me more the 98063 camera had Rev(ision)s and the 98067 camera has Ver(sion)s. You have a cross a 98067 Cam with a Rev(ision) -- please confirm what you wrote is correct.

http://www.jascoproducts.com/products/pc/viewPrd.asp?idcategory=0&idproduct=30



you will need Adobe Reader (free) to read the instructions
if you do not have it click the Get Adobe Reader button on the following link
http://www.adobe.com

If this seem appropriate there are vista drivers and instructions are on the following link near the bottom for the various cameras
http://www.jascoproducts.com/support/vista-certified-products.asp

Jan 03, 2008 | GE EasyCam Webcam

3 Answers

Ge EasyCam HO98063 Rev.1


This may provide additional information -- read this even if the message is not applicable -- it also contains information about non supported camera versions.

From GE

When I try to load the driver for GE PC Camera on my Vista operating system, it gives me the following message: Do you want to search for a driver?

Nov 17, 2007 | GE EasyCam Webcam

1 Answer

Web cam


You can go to http://www.jascoproducts.com/support/software-downloads.asp to find the driver for this webcam. Make sure you have uninstalled and unplugged the webcam prior to installing the driver. Once the driver is installed, plug in the webcam and reboot your computer. Good luck!

Sep 06, 2007 | GE EasyCam Webcam

Not finding what you are looking for?
Webcams Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...