Question about Insignia Televison & Video

Open Question

Insignia NS LCD37 won't turn on.

I have a Insignia NS LCD37 and it won't turn on. The power light is blinking like it is in standby.

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: Blinking Standby Light

kv 32hs420 stby light blinks 7x no picture/sound

Posted on Feb 10, 2008

  • 1 Answer

SOURCE: Insignia NS LCD32 standby light blinking off and on. No Power

I had this problem as well. Actually best buy just left my hosue to fix it. This is the second time they were here to fix it. The first time they said a part was loose. This time they had to replace a part.

Posted on Apr 01, 2008

  • 1 Answer

SOURCE: Need TV Code

trying to program my sharp tv and lost the manual to program my tv need the steps to program it help me

Posted on Nov 15, 2008

  • 2271 Answers

SOURCE: Insignia NS-LCD37-09 turns on but no image

If your TV is less then a year old, still under manufacturers warranty. If not under warranty the defective parts could be the power supply or the back light inverter board. Both boards can be replace easily.
The way to know if you have a defective backlight inverter is by shinning a light from a flash light near the screen with the TV on and check in a 45 degrees angle if you have a dark video in the background, if the video is present then you have a backlight board failure. If no video, then is a power supply failure.
I have both boards if you want to buy them.
Let me know if you require further assistance.

Posted on Jan 08, 2009

c-tekk
  • 177 Answers

SOURCE: Insignia ns-24ftv won't turn on

I hope it was plugged into a Surge Protector!!!!..

If not, make sure ALL your Breaker Switches are on in the house, RESET THE SURGE PROTECTOR (power bar thingy you got the tv plugged into..).... they will switch off usually to protect the tv...

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a insignia tv that shuts off about 2-3 minutes after turning on what could be the cause?


This is an indication of an overheating component on a power supply board. http://www.shopjimmy.com/insignia-6ha0132010-power-supply-for-ns-lcd37.htm

Oct 16, 2015 | Insignia NS-LCD37 37 in. LCD TV

1 Answer

I have a Insignia NS-L32Q-10A that will not power on. Now power on light or standby. I have replaced the power supply already. All caps look good and fuses check OK. What next???


ok, when you plug in the set, does the power light come on? Assuming you ordered a power supply in good working order, you may very well have a faulty main board. The power supply produces standby power that the main board uses to power the standby/power on light. Your main board also uses the standby power to provide the "ON" signal to turn on the rest of the power supply.

Feb 02, 2013 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

I have an insignia ns-lcd37-07 giving to me, i replaced power supply board and i still don't get anything. what should be my next step?


Now the tv is turn on,tv have power LED light indicaton but no picture?Still have a clicking sound but no picture on the tv LCD screen panel?Yes,than the tv Tuner signal board that the other board 70% also might have the problems too.That the board where the incomming broadcasting signal cable plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

Apr 13, 2011 | Insignia NS-LCD37 37 in. LCD TV

1 Answer

I have an l.c.d t.v. and the pic went black and the vol. is out but the power light is still on and it blinks 15 times


There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
You can get parts here:
http://www.shopjimmy.com/catalogsearch/result/?q=Insignia+NS-LCD37+

Dec 09, 2009 | Insignia NS-LCD37 37 in. LCD TV

1 Answer

The power indicator light comes on when you turn


One thing could be to check if your aerial is the correct one,(presuming you are in uk) for digital tv.
I have noticed that thre has been alot of questions regarding insignia tvs ,i suggest search this site.

Oct 14, 2009 | Insignia NS-LCD37 37 in. LCD TV

1 Answer

Insignia NS LCD32 standby light blinking off and on. No Power


I had this problem as well. Actually best buy just left my hosue to fix it. This is the second time they were here to fix it. The first time they said a part was loose. This time they had to replace a part.

Mar 01, 2008 | Insignia IS-LCDTV32 32 in. Television

2 Answers

Insignia ns-lcd37 remoe codes


Samsung DVD player codes: 20490, 20573, 21932, 21075, 20820.

With device turned on press DVD button on insignia remote then press and hold setup until the red led light blinks twice. enter code and it should blink twice again. press power button to check if code took. If not, try another code.

Oct 29, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71006 Answers

Jaime Hernandez

Level 3 Expert

2271 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...