Question about LG VOYAGER VX10000 Cellular Phone
My LG VX5200 only works when plugged in. As soon as I unplug it it goes blank and will turn back on. After I plug it in I get the battery charged message. I then have to hold down the power button to turn the phone on. While it is plugged in the battery symbol continues to flash. I have tested the battery by putting it in another phone exactly like this one and it the battery works. The phone does the same thing when plugged into a car charger also. I have a titaium voyager and it only works when i plug it in i dropper it in a pool but its weird because the phone still has water in the screen how do i get that out
To get the watte out of your screen is a difficult proccess but very possible...
get a very small screw driver
have somepatience and time
2on the outer sides of the speakers there is a small tab slide the screwdriver underneath that and scrape it off on both sides
3then remove the screws hiden under those tabs
4do the same for the bottom corners
5slide the screwdriver under the metalic silver lining around the front between the silver and black, slide screwdriver around until whole top pops off, proceeed with caution there are wires attached to the screen
6remoe any water very carefully with a cloth
7replace cover, screws, and tabs
8celebrate a job well done
Posted on Apr 06, 2009
First phone the phone is bad get A NEW PHONE. Your second problem TRY takeing a hair dryer on low to the screen or putting on the dash of a car for a bit
Posted on Feb 14, 2009
Tips for a great answer:
Sep 07, 2012 | LG VX8360 Cell Phone
Jun 23, 2012 | LG VX5200 Cellular Phone
Feb 13, 2010 | LG CHOCOLATE VX8500 Cellular Phone
Apr 26, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...
Jul 08, 2007 | LG VX3400 Cellular Phone
1,683 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: