Question about Computers & Internet

2 Answers

MATSHITA DVD RAM UJ-850S Device Not Even Shown

MATSHITA DVD RAM UJ-850S ATA
or
MATSHITA DVD RAM UJ-8505 ATA

Will not even show up in my computer, i have a Toshiba Satellite with Vista Basic
I tried repairing it and updating it, so far nothing has worked
i tried uninstalling the driver *Bad Mistake* and can't find a driver again
Need urgent assistant or i'll fail my exams o.O

I'm no computer wiz since i'm oly 14 but i still know quite alot so please go into detail.

Thx In Advance

Posted by on

  • 4 more comments 
  • me-an21 Mar 02, 2009

    my compac presario v3000 don't read any CD or DVD. I tried to open the device manager and it says that windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). i can't find any driver for this....i need your assistance please....

  • Anonymous Mar 07, 2009

    Shows a problem but said driver was up to day. Uninstalled, bad move, now I also can not find the driver to re-install

  • netego Mar 07, 2009

    My DVD drive is not showing up on my laptop. The device manager show a problem the driver but I cannot a update of any kind on the web.

  • Anonymous Apr 23, 2009

    Meu gravador de DVD matshita uj-850s detecta, mas da problema como se não fosse o driver correto

  • Anonymous Apr 27, 2009

    my matshita dvd ram uj-850s is not properly woriking not read any dvd cd plz help this problem

  • vishalvidhat Apr 27, 2009

    my mastshita dvd ram ui-850s is not properly working no read any dvd or cd so plz tell me the who finish this problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Found out that the problem with my DVD drive was a registry error. Had that fixed and all is fine with the world again.

Posted on Mar 15, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 45 Answers

Try a Google search for the driver. I got my printer driver that way. Prints just fine.

Posted on Feb 14, 2009

  • ae_7fam Mar 14, 2009

    Tru taking the drive out and looking for a model number.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The battery is fully charged, and the ac adapter is plugged into the laptop, when i push the on button the laptop will not start


Remove the battery and power source. Remove the RAM and hdd. Power up with the power supply and it should do something. If it does, replace the RAM and hdd it should now restart. If nothing, check the GPU.

Jan 10, 2017 | Computers & Internet

1 Answer

Thanks for all your help on ram chip now here is some thing no one has ans.


What is the setting on your computer for the clock? Make sure it is right.

Jan 12, 2015 | Computers & Internet

2 Answers

Are 2002 Aztec computers compatible


I am assuming you are discussing the 2002 Pontiac Aztec, the early crossover with the rather distinctive look. I would assume that since they were made by the same manufacturer and they used the same parts that their computers should be compatible. I can't say so for certain as you haven't provided much information, but, unless one of the Aztec owner swapped out the original computer and replaced it with an updated device, the computers should be compatible.

If you are thinking of trying to swap computer chips, I would advise you to wait and let a professional do it at an independent shop. The reason I suggest this is simple, unless you know how to access the computer chip correctly, you risk accidentally ruining it. If you handle the replacement chip incorrectly it is entirely possible that for a stray static charge to ruin the chip by blowing out a trace. Also, if you damaged the socket from which the original chip was removed then it is possible that you will not be able to reinsert the new device without bending any leads on the bottom. If the leads are damaged, then the new computer won't work.

Even if the new computer chip and the original chip were already installed in installable cases (the way most desktop computer chips are installed), it is possible that when you removed the computer, you might have damaged the receiving socket which means that when you go to insert the new computer carrier it won't work correctly because a few or many of the pins on the bottom of the board won't sit correctly.

Jan 03, 2015 | Computers & Internet

2 Answers

How to enable bluetooth


Your computer has to have a bluetooth radio. You can check
Control Panel > System and Security > Device Manager
Do you see a Bluetooth Radio listed?

If not, you don't have BlueTooth on your computer so you will have to add a BlueTooth device by plugging one into a USB port.

If you have a BlueTooth radio, go to Control Panel > Hardware and Sound > Device and Printers > Add a Bluetooth Device

This option is used to connect a blue tooth device (e.g. bluetooth headphons) to your laptop through your bluetooth radio.

See this Windows web page for more information.
Set up Bluetooth enabled device

I will respond to any additional questions you have.

Aug 05, 2014 | Dell Inspiron Computers & Internet

1 Answer

Toshiba Satellite A665 S6067 laptop wont recognize my SeaGate FreeAgent Go 500 Gb. device


I had a similar problem and I had to "Delete Volume" when in DIsk Management. I then had a choice to "Create Simple Volume" which I did, and then a wizard created the correct partitions and assigned a drive letter to my external drive. Everything was them OK.

Mar 21, 2014 | Computers & Internet

3 Answers

Http go acer com id 17883


I remember my password I wrote it down and even then it won't let me in. If I cannot get into this computer I will return it.

Mar 13, 2014 | Computers & Internet

1 Answer

Burning movies on the computer , playback fine on two computeers , will not play on ONN portable player used DVD-R


Burning dvd\'s is always a crapshoot when you have multiple machines. Computer drives are more tolerant on playback - the problem lies with your other, independent playback units. That is why in your main viewing area it is important that you have a few units so that if disk does not play in one machine, it will play on another. Has to do with the individual differences and calibrations of the machines involved. Store bought dvd\'s have less problems because their laser reflectivity is always higher than disks you burn, and therefore, easier to read properly. Price of the unit has no reflection on ability to properly read the disk. Sometimes and often, a cheaper machine will work better with copies - you never know.

Feb 19, 2014 | Computers & Internet

2 Answers

Www.hp.com/go/techcenter/startup


My computer is appear " The System BIOS has detected that your notebook PC was not into hibernation or shutdown to avoid overheating.The system is now operating normally.
Overheating may occur if the cooling vents are blocked or the operating temperature exceeds the specification.The notebook PC should return to normal operation once the situation is resolved."
System temperature (90D)

Apr 08, 2012 | Computers & Internet

1 Answer

After turn on my computer I have only three short beep.


Open the cpu cabinet cover.Then reconnect the RAM memory into motherboard. Make sure motherboard is not ground with cabinet cover. Clean dust from motherboard .If there is any pci or vga card reconnect it. Also pull cmos cell from motherboard for 10 minutes then all settings defaults then check. Let me know if you need further assistance. Thanks for using FixYA.

Feb 03, 2011 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,908 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101580 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...