Question about Laser 3115cn All-In-One Printer

1 Answer

My printer epson stylus C45 series do not print

The red and green light keep blinking and troubleshooter said that part of my computer is at its life end

Posted by on

  • 2 more comments 
  • tamarindox Mar 17, 2009

    I have the same problem downloaded the ssc service utility it says not recognisez in the printer present state

  • Anonymous Apr 04, 2009

    Do not print

  • Anonymous Apr 06, 2009

    parts lifes is end

  • Anonymous May 11, 2010

    I believe you might mean the print cartridge is at it's life's end?? Replace ink.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 353 Answers

If both lights are flashing, it usually means the Waste Ink Pads in your printer are saturated with ink and the waste ink "protection" counter has exceeded its limit. You can restore your printer to a working condition immediately by using the SSC utility - download from

http://www.ssclg.com/epsone.shtml

and use it to reset the Protection Counter. This will stop the lights flashing and restore normal operation.

However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens. This requires the disassembly of the printer.

If you decide to have a go at replacing the ink pads yourself, post a new comment to this effect and I will provide further help.

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect two computers to my Canon MX3520 printer?


in the control panel where you see add a printer, you have to add the printer to each computer then click on the share printer box

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

Is my new Epson printer compatible with Linux


http://www.openprinting.org/printers

http://www.openprinting.org/printers/manufacturer/Epson

Don't really know you failed to provide the exact model number ????????????????????????????????????????????
see if model number is listed in the above link

Jan 09, 2017 | Epson Office Equipment & Supplies

1 Answer

Need to change font size larger when printing


Change the font on your document before printing

Jan 12, 2015 | Office Equipment & Supplies

1 Answer

Why is print quality poor after inserting new ink. Copies are faint and have lines


the cartridge is clogged with ink that has dried and reduced the slit. you need to replace the cartridge with a new one. it happens usually if you recharge the cartridge 3 or 4 times with compatible ink.

May 07, 2014 | Office Equipment & Supplies

1 Answer

Canon mg6150 printer too much pink in photo's when printed


Please calibrate the printer using Canon software.

Mar 08, 2014 | Office Equipment & Supplies

1 Answer

Prinnter not printing but showing 'put custom in manual tray'


There is still a print job in the queue. Place a sheet so it prints or kill the job.


Open Printers and Faxes. Open printer. Highlight jobs and Right click > Cancel, or Documents > Cancel.
For those stubborn jobs, Right click My Computer > Manage. Choose Services and Applications > Services > Print Spooler. Right click and stop. Then start. This may have to be done from the Print Server if it's network printer. Contact IT to kill.

Nov 09, 2012 | Office Equipment & Supplies

1 Answer

Laser printer makes light clicking noise when idle


When idle is potentially the fuser unit, after heating and cooling. However the print quality issue associated with the clicking sound could indicate an electrical issue. The HVPS maybe faulty causing the print quality issue (due to dependant parts) and the electrical click. In any case I would recommend calling Brother and finding the nearest authorised service agent.

Oct 20, 2012 | Brother Mfc-9840cdw All-in-one Laser...

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

Not finding what you are looking for?
Laser 3115cn All-In-One Printer Logo

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Laser Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

PrintDocta

Level 2 Expert

217 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Laser Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...