Question about HP PSC 2110 All-In-One InkJet Printer

1 Answer

Hp psc 2110 copy problem stuck warming up & scanner bar get stuck

When the printer is first turned on the scanner bar gets stuck and grinds. It doesn't seem to want to copy either it stops after about 2 bars and says warming up etc. etc. If i push cancel it says that it is cancelling but never finishes and says it's bust whenever anything is pushed..

one more thing is the little panel supposed to have four little nobs on the underside it looks like there are four buttons it is supposed to push but in one spot it looks like a nob is broken.

Posted by on

  • Anonymous Apr 27, 2009

    Same exact problem. Please help!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

The scanner carret belt might be too loose, so the printer cannot pass through the self-test. Try tightening it a little bit. Also you have to either repair the nobs or solder it.

Posted on Aug 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer was in storage for a year, I now have it out and put new cartridges in it and it said it needed to align, so it printed out the aligning paper however it then said scanner failure and the...


Do the following:
a partial reset by pressing and holding Cancel and the Left Arrow while plugging in the power cord.

Wait 30 seconds (which was originally designed by help desks so the clients would calm down).
Hold down cancel and LEFT arrow buttons on HP 2110, while plugging the power to HP 2110.
Release the cancel and LEFT arrow buttons.

Nov 11, 2010 | HP PSC 2110 Color Printer

1 Answer

I have an hp psc 2110. I made some enlarged


Some basic steps to begin with:
1. Disconnect the printer from the computer and power off then back on. In some cases the problem can be caused by the print spooler on the computer.

2. If the problem persists, power off the printer and remove the power adapter. Leave the printer sit for 10 minutes or so, allowing the internal memory to clear, After which you should hook the printer back up and reconnect to the computer.

Finally determine if the printer is being recognized, on vista or windows 7 you can do this by clicking 'start' >> 'devices and printers'... or on xp 'start' >> 'control panel' >> 'printers and faxes'
If it is not listed as connected on the list (ie. offline) try uninstalling the printer and rerunning the drivers.

//halfs

May 25, 2010 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

I don´t know where is located the scanner glass in my hp psc 2110 all in one


Hello,

The Scanner glass is located on the top of the device under the grey cover (This cover will lift exposing the scanner glass)

May 27, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Copy problem w/ Windows Vista


For a complete set of instructions on copying with your printer, please click here
If that doesn't get you there, let me know the specific error you're getting and we'll sort it out!

Apr 20, 2009 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

Hp psc 2110 won't work in vista


Vista has the drivers for the HP psc 2110 embedded in the OS.

So, you should be able to print, with the default drivers. But, you will not be able to scan as of right now, unless someone releases an update for the HP PSC scanning software. I doubt that will happen, as these all in one's are so old.

Such a good little printer/ scanner/ copier too.. kind of sad to think its that obsolete that its not compatible for scanning.

Jan 19, 2009 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Hp psc 2110


You can get the complete software package including the scanner. proceed to the link below

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=79488&lc=en&cc=us&dlc=en&submit.y=6&submit.x=11&lang=en&cc=us

Good Luck

Jul 25, 2008 | HP PSC 2110 Color Printer

1 Answer

Scanner bar jammed by cartridge allignment


Any fix for this I have the same issue?

Dec 11, 2006 | HP PSC 2110 Color Printer

Not finding what you are looking for?
HP PSC 2110 All-In-One InkJet Printer Logo

Related Topics:

833 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...