Question about DVD & Blu-Ray Players
Posted on Nov 20, 2009
Universal remote controle!
Posted on Feb 14, 2009
If your oneforall remote didn't come with the page that gives you the set codes, you can try 991 as the code. So in this order ;
Press tv, wait fir it to blink
press 9 9 1, then power
(it should blink again)
press tv again - it should set
***IF THIS DIDN'T WORK***
SLOWLY press power, then tv, wait,
then power, then tv, wait,
After several times it should set.
(Each time you do this, it tries yet another code to set)
Posted on Jan 14, 2009
I figured out, unlike all the other posts, you don't have an enter button. But Instead, you would hit the 2 and OK button at the same time for a few seconds. I had the RC1 message and I did the 1 with OK and it worked. so if you have RC2, you should hit the 2 and OK. Should work!!
Posted on Jan 31, 2009
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Posted on Apr 06, 2009
Tips for a great answer:
Dec 20, 2015 | Panasonic DVD & Blu-Ray Players
Oct 10, 2012 | GoVideo VR4940 DVD Player/VCR
Oct 24, 2010 | Panasonic DMR-E55 DVD Recorder
Mar 20, 2010 | Funai PY90DG DVD Recorder
Feb 06, 2010 | Toshiba DR410 DVD Recorder
Jun 11, 2009 | DVD & Blu-Ray Players
May 03, 2009 | TruTech TT1620 DVD Recorder
Dec 08, 2007 | Samsung DVD-HR720 DVD Recorder
496 people viewed this question
Usually answered in minutes!