Question about Acer AL1716 17" LCD Monitor

1 Answer

Wont work It will say the ACER logo when I turn on the moneter and then say "no signal" can anyone help please?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 83 Answers

Hi the graphics card could be faulty or processor, is the pc firing up properly?

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My acer monitor p191w will turn on acer logo comes on goes black then a screen comes out saying no signal then turns of light turns yellow ...tried restarting monitor nothing


Connect the monitor to a different computer, to see if the monitor works at all.

Connect a different monitor to your computer, to see if your computer really is "sending" a video-signal through the "data" cable. If not, then either the data-cable or the video-card inside the computer is faulty.

Jul 13, 2011 | Acer P191WBD LCD Monitor

1 Answer

Dear admin, i would like to ask you something... i have monitor ACER AL1716.. recently when i started my PC, the monitor suddenly turn on and off continously (you know when we turn on monitor, it showed...


I suspect that the problem is with your PC, and in particular your video card. The fact that your monitor is displaying the logo indicates that the monitor is not receiving a signal from your computer. You may want to try hooking the monitor up to another PC and see if that is the problem. The fact that your monitor turned off and on for a few times also indicated that the signal from the PC video card was sporadic and finally failed leaving you with the monitor logo. Disconnect the PC from the monitor and see if the logo is there. Also check the cable from your video card to your monitor to see if the cable is bad. You may have to borrow a video cable from a friend to test this out.

Apr 22, 2011 | Acer Computers & Internet

1 Answer

Monitor problem


The power light is flashing green can indicate start/restart of the power supply due to shorts circuits or failing power supply due to bad caps, look for bad caps with bulging top first, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums
Post back what you see insdie so we can guide you furhter.

Feb 20, 2010 | Acer 17" AL1706B LCD Monitor

1 Answer

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it.

Jan 12, 2009 | Acer AL2016 W 20" TFT LCD Monitor

1 Answer

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc.
If the connectors are Ok, it could be the converter or the main board that has the fault. This could be caused by a power surge, or just a mechanical failure.
There is no easy diagnosis for this\ one, without actually checking the parts. I would recommend taking it to a repair place.

Jun 03, 2008 | Gateway FPD2275W LCD Monitor

1 Answer

Acer LCD Monitor only displays "acer" logo


You are correct, it could be a power surge that has caused it.

Try this..
Unplug the monitor from the wall.
Remove all the video connections at the monitor end.
Wait 10 minutes then plug the monitor back into the wall (do not connect the video leads)

Turn it on and see if it goes past the ACER logo now. If so, replace the video cables and try the computer.
If not, then one of these will apply and a tech will be required..
  1. The internal bios has been corrupted.
  2. The power supply inside the monitor may have issues preventing the video board from starting correctly. This could be as simple as a few failing capacitors.
Number 2 is the most likely cause with an Acer monitor though. Any local tech will be able to correct it fairly cheaply, but phone around for quotes..they can vary a lot.

Jun 03, 2008 | Acer X193W LCD Monitor

1 Answer

No signal


Along with using another monitor to change resolutions, try changing Refresh Rate (in advance button), then hooking the LCD back up. LCD's typically like 60Hz Refresh Rate best, but try several.

Mar 22, 2007 | Acer AL1715 (Black, Silver) 17" LCD...

Not finding what you are looking for?
Acer AL1716 17" LCD Monitor Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...