Question about Sharp BQC-XGE630U/1 Projector Lamp for XG-E630

1 Answer

Image problem how do i get the image to be correct when i ceiling mount my sharp xge630u projector?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

IF I understand the problem from the limited info in your question, the problem is a distorted picture on whatever surface [probably a wall, or screen] onto which the image is projected.

With all lenses, the axis [centerline of the lens projected] MUST be absolutely PERPENDICULAR [in both the vertical and horizontal planes] to the perfectly plane [flat] surface onto which the image is projected.

IF for example, the projector is mounted in a rear corner of the room, and the camera is aimed downward and to one side to project the image on the center of the opposite wall, or a screen located there, the image will be distorted. It will be larger on one edge [fartherist from the lens] and smaller on the opposite [nearest] edge.

If it is non-perpendicular in only one axis, then two opposite edges will be different lengths, and if out of perpendicular in two axis then no edges will be the same length.

The solution to this problem is that the center axis of the lens must be perpendicular to the surface projected on, in both vertical and horizontal axis.

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to you flip the image on the VT85LP projector. It is in the ceiling and I want to flip the image.


You n eed to check the settings menu and change the orientation setting for the projector so that it is set to ceiling/front.

Good luck

May 16, 2011 | NEC VT85LP Projector Lamp for VT480, VT580

1 Answer

How do I zoom and focus the LV 7350? It is ceiling mounted. I want to make the image smaller so that people in the audience can see the image over the heads of those in front.


There are zzom and focus buttons on the remote if you have it. If not, use a safe ladder and use the zoom/focus buttons on the projector itself.

Good Luck

Aug 13, 2010 | Canon LV-LP11 Projector Lamp for LV-7345,...

2 Answers

My sharp pg-d120u turns on but no image. might be the bulb.


If you are nat getting an image then you need to replace the bulb.

Mar 21, 2010 | Sharp BQC-XGNV4SU/1 Projector Lamp for...

1 Answer

How do i flip the projector image,its now in upside down mode.


go into the menu, in the image adjustments, and there should be a screen adjustment, and select front (and non ceiling).

Aug 03, 2009 | BenQ (200NSH-LAMP) Projector Lamp for...

1 Answer

Image upside down


I'm on this site because my projector is down after swithcing out the bulb or I could jot down the exact steps for you. It's a very easy fix. When you push the menu button on your projector to get into settings, there is one that will allow you to flip the image. Sorry I can't be of more help

May 15, 2009 | Optoma / CTX EzPro 610H / 615H Replacement...

1 Answer

Projector image burn (retention)


first off, make sure you got the right lamp and it's from sharp, not a "lamp store". the quality varies. it could be burning hotter than it's designed for. second, you may need to reset the setting to factory default (through the menu options). third, you may need flash upgrade. you'll need to contact a sharp service center for that.

Mar 28, 2009 | Sharp Projector lamp Projector Lamp

1 Answer

Image upside down


Check in the settings. One of them will have the option to invert the image not sure what it will be called. That should flip it upside right. I had the same issue with my projector when I first got it just messed with menu until i found it.

Feb 11, 2009 | Epson (V13H010L13) Projector Lamp for...

1 Answer

Invert image on projector


Somewhere in the menu or setup screen, you should be able to choose Orientation. Check that.

Jul 07, 2008 | Projector Accessories

1 Answer

Canon lv-7220 inverted view.


Yes,

Go to the menu and setup the prj mode.and the image will be inverted.

Viren

Nov 16, 2007 | Canon LV-LP18 Projector Lamp for - LV7220,...

Not finding what you are looking for?
Projector Accessories Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Projector Accessories Experts

Bernard D'Souza

Level 2 Expert

161 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

johnny3h

Level 2 Expert

73 Answers

Are you a Sharp Projector Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...