Question about Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

My husqvarna 50rancher chainsaw wont start

It started after lengthy storage but wont anymore

Posted by on

  • david_ostrom Feb 14, 2009

    What am i looking for on the flywheel?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

Check your fuel make sure it is new fuel. Check to make sure that you have spark. Even replace the plug, for the price of 3dollars it is not a bad deal. If those do not work then you are going to have to check your flywheel and your armatur those are the items that would prevent you from firing since Huska makes a excellent carb you do not need to mess with it at all. Thank you for choosing FIXYA.COM please rate

Posted on Feb 14, 2009

  • Jeremy Reddick
    Jeremy Reddick Feb 14, 2009

    You are making sure that the flywheel is not cracked or broken. Also you are making sure that the armature is working correctly. So by spinning the flywheel by hand you will be able to feel if you get magnet contact at the armature

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Husqvarna 65 cutsout cuts two blocks


check tank vent and the coil,to see if vent is plugged,and the coil gets hot

Mar 12, 2015 | Husqvarna Fuel Gas Line Hose 501462501 65...

1 Answer

My chainsaw wont start


Check to see if it is getting fuel into the cylinder. Does the sparkplug get wet when trying to start?

Jul 18, 2014 | Husqvarna Chainsaws

1 Answer

Dont wont to start to much fuel in cilinder


Never pull the starter more than 3-4 times under full choke. Pull 3-4 times on choke, push in to half choke and pull, should start.

Feb 14, 2014 | Husqvarna/jonsered 136-142,2036-2137...

1 Answer

Husqvarna 257 chainsaw wont start


The flywheel has an alloy key moulded into it, check the key has not sheared and the timeing is now out,

Dec 27, 2012 | Husqvarna Chainsaws

1 Answer

My husqvarna chainsaw wont start


Try bypassing the switch by connecting the two wires together. If it starts then you know what the problem is.

Nov 23, 2011 | Husqvarna Chainsaws

2 Answers

I have a husqvarna 261 chainsaw. it will start half the time....the other half...no chance.i changed the spark plug.and im getting very good spark. took the carb apart and cleaned it. checked the plug when...


Hi, from what you have written I believe you have a faulty cdi unit. Carbys don't generally run perfectly intermittently. To test the cdi theory, close the sparkplug gap to approximately half normal gap. If the saw runs fine you have a faulty cdi, shorting ht lead or stop wire. Regards Phil.

Apr 26, 2011 | Husqvarna Chainsaws

3 Answers

Husqvarna 14" chainsaw wont start. put new plug


Try a new spark plug.If still does not fire you have a bad ignition coil.

Nov 26, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

Not finding what you are looking for?
Husqvarna "Chain Saw - 16" Bar, 3 Hp Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Chainsaws Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

375 Answers

Phil Walker
Phil Walker

Level 3 Expert

602 Answers

Are you a Husqvarna Chainsaw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...