Question about D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point

1 Answer

No power LED

I unplugged my DWL 2000 AP + yesterday and have now plugged it back in and it is totally dead. No lights at all.
Thanks

Posted by on

  • crburton Feb 14, 2009

    I have a surge protector and the lead is fine.

    Still no joy



    Chris

  • Luke Kim
    Luke Kim May 11, 2010

    have you checked if u have plugged it in correctly, also if the wire leading to the plug not kinked or cut somewhere. Its hard to really kill the router just by pluggin and unplugging the thing. unless you had dropped it. had a surge and had not protected it with a surge protector, or the plug's transformer overheated and shorted there. otherwise u can try to plug it in and then push the default reset button for 10 seconds.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Try swith a differnet PSU ?

Posted on Feb 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The led of power supply turned on and turned off three time and stop


Have you tried unplugging and plugging the power supply back in? If that doesn't help, try to check the manual for power issues:
Link DWL 2100AP user manual

Oct 19, 2012 | D-Link AirPlus Xtreme G DWL-2100AP...

1 Answer

We can't turn on the TV. We[ve tried the remote & manual controls & have unplugged it & plugged it back in using both the surge protector and wall outlets to no avail... Any suggestions?


The power LED indication light flashes or totally dead?The power supply board is dead.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacemrnt.

Oct 17, 2010 | Olevia LT42HVi 42 in. LCD Television

1 Answer

Hi, My d-link dl-604 suddenly stopped working. When I plug it in, only the power led and #4 lights are up. None of the other leds are responding nor the internet is not working as well. Please help. Thanks


The following reset procedure will completely restore the default settings on your D-Linkmag-glass_10x10.gif device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP.

Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.

Note: Do not recycle power during the reset procedure.

The default user name for most D-Link devices is admin and the password is left blank.

Hope this helps! Give me thumbs please!

Aug 23, 2010 | D-Link DI-604 4-Port Cable/DSL Router...

2 Answers

DWL-2700AP reset default settings


Remove 13 screws from the perimeter of the back side of the DWL-2700AP and pull the covers apart. On the inside along the bottom adjacent from where the network cable plugs in, you will find a reset button. It is next to the white plug that leads to the antenna. You will need a flat screwdriver or something thin and sturdy to wedge between the casing and the reset button. While the AP has power, press the button and hold it in for a few seconds then release. Give it a few minutes and the factory defaults should be restored. Default IP: 192.168.0.50, Default subnet mask: 255.255.255.0

Jul 18, 2009 | D-Link AirPremier DWL-2700AP 802.11g/b...

1 Answer

Dwl 2100ap


This is the power cycle of death. No way to recover at this point. Send in for repair.

Jan 28, 2009 | D-Link AirPlus Xtreme G DWL-2100AP...

6 Answers

How to probe the configuration or reset the 2700AP?


Restore it to default, with these things, if it wont work on automatic, then something is worng.

Feb 27, 2008 | D-Link AirPremier DWL-2700AP 802.11g/b...

4 Answers

DWL-2100 AP will not reset to factory defaults with reset push. Ideas?


Once reset right click on the connection in the task bar ( icon with two computers) click status, click properties, scroll down and select Internet Protocol (TCP/IP), click properties, click use the following IP address:, and add the following:

IP: 192.168.0.66
Subnet: 255.255.255.0
Default Gateway: 192.168.0.50

Click OK, OK, and Close, Now Enter 192.168.0.50 in internet explorer and it will work. You can now change all the settings you wish to.

Hope this Helps

Admin
CCNA, CCSP, MCSA

Dec 28, 2007 | D-Link AirPlus Xtreme G DWL-2100AP...

Not finding what you are looking for?
D-Link AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Mike

Level 3 Expert

4334 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...