Question about Janome Memory Craft 9000 Computerized Sewing Machine

1 Answer

Where to obtain new screw for embroidery hoop

The screw has lost its threads

Janome 10001 memorycraft

Posted by on

  • Anonymous Mar 16, 2014

    my janome 11000se keeps coming un threaded in embroidery mode

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 134 Answers

You need to contact Janome here

http://www.janome.co.uk/contact.php

Posted on Feb 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I FIX A FM PHASE ERROR ON MY JANOME 6500 MEMORY CRAFT


Check your Feed dog switch for raised or lowered positioning and reengage to either setting and rotate the hand wheel to reengage the gears properly.

Cheers,
Kelly
San Diego, CA
Embroidery Services

Nov 28, 2014 | Janome Memorycraft 6500P Computerized...

1 Answer

My bobbin thread is part of my embroidery on my memory craft 11000


you may have the fabric not tight enough in the hoop or try using the same colour thread in the bobbin

Nov 02, 2014 | Janome 11000 Memory Craft Special Edition...

2 Answers

Janome mb4


I suggest you call a Janome dealer and ask them your question.

Sep 02, 2014 | Janome MB4 Four Needle Embroidery Machine

1 Answer

Janome


Sounds like your embroidery unit may have a bad motor or broken drive belt. Get that unit into a repair shop.

Cheers,
Kelly
San Diego, CA
Embroidery Services 0188ffa3-5fd0-48d4-8515-8c492b530432.jpg

Jul 30, 2014 | Janome Memorycraft 9700 Computerized...

2 Answers

Embroidery hoop


No there should not be a lot of play.

Jan 31, 2014 | Janome Memorycraft 9700 Computerized...

1 Answer

Free hand stitching


Drop your feed dogs, remove your normal foot... replace with embroidery or darning foot... or leave without a foot. stretch fabric in a hoop..... set your stitch.. and sew as you move the hoop.

Jul 25, 2012 | Janome Memorycraft 6500P Computerized...

1 Answer

Does this machine have a low shank --- or high shank?


High Shank Machines are all the Janome Embroidery models MC 8000, MC 9000, 10000, 10001, 11000, 200E, 300E, 350E....etc
If yours is not an embroidery machine, it has a LOW SHANK .....the higher shank allows for easier access for the embroidery hoop


Bargain Box

Apr 19, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

Is this machine a high or low shank? I'm trying to buy a 1/4" quilting foot or seam foot and not sure which foot to buy.


High Shank Machines are all the Janome Embroidery models MC 8000, MC 9000, 10000, 10001, 11000, 200E, 300E, 350E....etc
If yours is not an embroidery machine, it has a LOW SHANK .....the higher shank allows for easier access for the embroidery hoop.

Nov 12, 2009 | Janome 8080 Computerized Sewing Machine

2 Answers

Embroidery Hoop


Any authorized Husqvarna Viking dealer will be able to get the hoop for you. Replacing the screw is much more economical and that same dealer will have access to the part number so that they can order it for you. This will take longer but will cost about 1/10 as much.
To find your nearest dealer, or one a little farther away, check the dealer locator at:
http://webservices.us.vsmgroup.com/DealerLocator.aspx?Brand=Viking


Aug 27, 2008 | Husqvarna Viking 1

2 Answers

Cannot get Janome 10001 to read via USB direct link from computer


here's how I do it.
1. Get the design into jef or sew format (the only kinds janome reads). You probably already knew this, but some newbies try to use pes or art files.
2. Save it onto your computer (and remember the name of the file). I have a folder in my computer labelled "embroidery files" and then have subfolders dividing up those designs - such as animals, flowers, fonts.
3. Hook your sewing machine up to the computer via the USB cable.
4. Pull up your Janome "Easy Transfer" program (it came as a CD with your machine - this is NOT the customizing software).
5. Use that program to find your embroidery file. It's not going to show sew and jef in the same file - you'll have to switch back and forth.
6. On your sewing machine, click on the bottom button (under the screen) that shows the computer to the sewing machine (the third one).
7. Now click on the computer software "write to machine" or whatever it's called (it will be on the top tool bar).
8. Your file will be written to the sewing machine's memory and organized by the embroidery hoop size (A, B, C).
9. It will stay in the sewing machine memory until you use the cable hookup to delete it (reverse of the writing).
10. The 10001 software ate lots of the resident memory in the sewing machine - you can't store as many designs in it as the 10000 would allow. That's perfectly ok, as it only takes a few moments to move designs in and out of the machine.

To be perfectly honest, I vastly prefer doing the USB cable transfer to using the memory card jammed into the card reader deal. It's easy and quick.

Oct 30, 2007 | Janome Memory Craft 9500 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Irene Tulloch

Level 2 Expert

434 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...