Question about Insignia D300a PC Desktop

1 Answer

Problem with side USB ports on Insignia Desktop Computer

I have four usb ports on my desktop insignia computer, , two in back and two on the side. The back is working but the side usb ports are not. I did all the troubleshooting but cannot repair this problem. Any suggestions. I unhooked my printer usb from the back and tried it on the side. did not work. I had been using the side USBs for my camera and Palm pilot. Please advise

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,602 Answers

DO YOU HAVE A 99 CENT STORE WHERE YOUR AT, BUY A HUB THAT EXTENDS THE PORTS AND GIVES YOU 4 MORE USB PORTS,

THERE SOME PLACE TO CHECCK IN THE CONTROL PANAL, DEVICE MANAGER, NETWORKING AND SHARING, PROBLEMS AND REPORTS,SECURITY CENTER, SYNC CENTER, WINDOWS DEFENDER AND WINDOWS FIREWALL.

CHECK FOR UPDATES, SWAP THE CONNECTOR WITH THE FRONT OR REAR CONNECTION OF THE USB CONNECTORS AND SEE IF IT IS THE BOARD THE PROBLEM.

ROD

Posted on Feb 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of ports


There are four USB ports on the back of your computer. They are all identical. As long as you have a USB Printer you can plug it in to any one of the four USB ports.

Dec 18, 2012 | eMachines E Machines El 1200-06W Desktop...

1 Answer

Where is the usb port


I don't have one of these, but from looking at the picture then I am guessing there is probably a couple on the back. They should be up the right hand side, with all the other ports. There will be some on the back somewhere.

Hope this helps.

May 25, 2011 | Insignia D300a PC Desktop

1 Answer

The two side usb ports are not working


Follow the prompts on your PC'S device manager,to have them reconfigured if need be again.

Jun 21, 2010 | Insignia D300a PC Desktop

2 Answers

My two side USB ports on Insignia d300a have stopped working. Nothing.


Un-install the driver for any USB ports in divice manager under the system tab in controll panel. Restart your system and windows will auto install the drivers.

Hope this works,
Luke Wilcox

Dec 29, 2009 | Insignia D300a PC Desktop

1 Answer

Need driver for insignia computer speakers (running Windows XP)


You don't need a driver for speakers. Plug them into the green receptor on your sound card or your sound port on your motherboard.

Jun 14, 2009 | Insignia 2.1 Speaker System (3-Piece)

1 Answer

Mp3 insignia sport


is the battery in correctly and is the usb cable fully inserted on the computer end if your going throug a usb multi-port hub make sure its not over loaded with too many devices
if no hub try a different usb port or a different cable

Aug 10, 2008 | Insignia NS-DV2G MP3 Player

1 Answer

My Insignia 2GB Video MP3 Player is frozen


try to turn it on and if it freeze hold the power button for 10 sec to reset it.

Jul 12, 2008 | Insignia Sport MP3 Player

1 Answer

Help


These units take more power than a thumb drive and sometimes the front USB ports on a computer just don't push enough current to recognize these players (I have the same issue).

Try plugging it into the back USB ports.

Also, make sure your USB ports are working correctly in your device manager.

Apr 27, 2008 | Insignia NS-DV2G MP3 Player

1 Answer

Computer doesnt register device as being plugged-in


This can be a problem with your USB capabilities in your computer.

If you are using your front USB ports, it is possible they are underpowered. Try switching to the rear USB ports.

You can also try a self-powered USB Hub to improve performance or purchase a USB 2.0 card for your system.

It could be something as simple as a bad USB cable. That would be the cheapest place to start...next to trying the rear USB ports.

Mar 05, 2008 | Insignia NS-DA1G MP3 Player

1 Answer

Back USB ports


I think maybe you are puting the usb connection in upside down or you are trying to put it in an iee1394(firewire) port or the LAN connector.

Nov 11, 2006 | Insignia D400a PC Desktop

Not finding what you are looking for?
Insignia D300a PC Desktop Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

660 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

604 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you an Insignia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...