Question about Vivitar ViviCam 3826 Digital Camera

1 Answer

Software Issue I have a ViviCam 3826 camera, which to download uses Windows 98 or XP operating systems. I have converted to a Vista operating system and am wondering if there is software out there that I can download to my computer to allow me to download my pictures.

Posted by on

  • Anonymous Apr 22, 2009

    I have the same problem as u buddy >.<

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Vivitar Master
  • 100,243 Answers

You don't need any special software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as WIndows Photo Gallery or Picasa.

Posted on Aug 09, 2012

6 Suggested Answers

SOURCE: Vivitar Vivicam 4100

I had the same problem and I think I may have just figured it out. Plug in your camera as you normally would. Then right click on My Computer and then click Properties. Click on Device Manager and locate the Vivicam 4100 USB Device in the Drives section. Right click it and Uninstall. When it is off the list, unplug the camera from the computer. With the camera still turned on, plug it back into the computer. There should be a little icon in the system tray that it is locating the drivers. It will take a long time so be patient. After a few minutes, a window should appear asking what you want to do with the new device. If you open the folder to view files, you'll want to make sure to copy the drive letter to make a shortcut to the desktop as the drive won't always or immediately show up in My Computer. Also make sure to Safely Remove Hardware from the system tray. I hope that helps. It was a pain in the you-know-what.

Posted on Jan 10, 2008

  • 1 Answer

SOURCE: Vivicam 35 installation software

i need a software

Posted on Jan 15, 2008

SOURCE: vivitar vivicam 3750 software

need software vivicam 3750

Posted on Mar 02, 2008

  • 4 Answers

SOURCE: software cd

Copy and paste the url into your address bar and download the the first file. I was in the same boat and I downloaded it a few minutes ago and it works ;D

http://www.commentcamarche.net/pilotes/telechargement-95-pilote-vivicam-55

Posted on Jul 12, 2008

  • 4 Answers

SOURCE: In my ViviCam 8018 digital camera's software and user manual disc, I cannot access the user's manual. How do I do so?

Go to this web page and save the manual as a PDF on your hard drive:http://www.vivitar-experience-image-manager.com/manuals/en_US/ViviCam_8018_Camera_Manual.pdf

Posted on Oct 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Id like to use my GE minicam pro model no. 98667 but i do not have the cd for it.How can i fix this for free?


Hello!
Try one of these drivers-find your model and download.

http://www.jascoproducts.com/support/software-downloads-win7.asp


If your Operating System is Windows 95, 98, XP, 2000, use the link above and scroll down to cameras; If your Operating System is Windows 7 or Vista, download from this link:

http://www.jascoproducts.com/support/software-downloads-win7.asp

Regards!

Jun 12, 2011 | GE MiniCam Pro HO98756 Webcam

1 Answer

Hi I have philips pc camera sic4750 I bought, I could not download throught the cd that came with it thanks


Philips PC Camera SIC4750 is only compatible with OS Windows 98 Second Edition, Windows 2000 & Win XP. (Only 32Bit system ie x86)

FAQ from Philips (Ref. Link)
Question: Can I use my webcam with Windows 7 or Vista ?
Answer:- At the time this webcam was designed, Windows Vista and Windows 7 operating systems did not exist yet. Unfortunately, the internal hardware of the webcam does not match the requirements of these operating systems. Therefore we cannot provide a software upgrade (driver upgrade) to support Windows Vista or Windows 7. We apologize that we are not able to support you in this matter.

Too bad Philip do not provide the drivers if your are Using Vista or Win 7 or any x64Bit system.

Dec 07, 2010 | Computers & Internet

1 Answer

I lost my software for my vivitar vivicam 3760. the vivitar website doesnt have it. anywhere I can go to download it? havent had any luck finding it.


if you are running windows xp,ME or vista or mac.then you dont need need drivers it is plug and play and will automatically install if you connect it.but if you have windows 98 you can download drivers from link below:
http://cameras-and-mp3-player.free-driver-download.com/Vivitar/35313/Vivitar-Vivicam-3760-Mass-Storage-Device-Driver-Windows-98.html

thanks and plse do not forget to accept the solution.

Apr 03, 2009 | Vivitar ViviCam 3760 Digital Camera

1 Answer

I have not got the Disc to download the software for my Vivitar 5385...any ideas..


Hello Tea22me,
The Driver to will depend on your Operating system.
For XP and above,you should not need any drivers for the camera. If you are still on windows 98, then please download the Mass Storage Device drivers from the following link:
http://www.opendrivers.com/driver/235333/vivitar-vivicam-5385-mass-storage-device-driver-windows-98-free-download.html

Please let me know if this works for you.

Regards,
Srinivas


Apr 02, 2009 | Vivitar ViviCam 5385 Digital Camera

1 Answer

I have Gateway 98 Windows and was trying to download Itunes for Ipod shuffle. I was told that Itunes would not download to 98 windows and that I need software to update computer. Was told I needed...


It appears that you are using Windows 98 as your operating system, if this is the case it is not compatible with the newer Ipod software. The new Ipod's require at least Windows XP service pack 2, Vista, or newest Mac software. Here is a link to Apple's website so you can check the system requirements in the support section. http://www.apple.com/support/

Nov 21, 2008 | Gateway Audio Players & Recorders

1 Answer

Vivicam 3740 device driver


Vivitar Vivicam 3740 drivers img.php?i=ahr0cdovl2kuchjpy2vydw5uzxiuy29tl2ltzy91mi80lzcvny8xmdb4mtawlziymtexogwuanbn Manufacturer: Vivitar Device family: Photography Digital Cameras Operating system: Vista, XP

Some Vivicam 3740 drivers may be zipped. To install them, you will need the archivers WinZip or WinRar to unpack them prior to setup. If your Internet connection is unstable, use the download manager ReGet to simplify the downloading process. Before you install Vivicam 3740 software downloaded from our site, please make sure that the program really suites you. To download the necessary Vivitar driver for your device, click on the link below.

Nov 17, 2008 | Vivitar ViviCam 3740 Digital Camera

1 Answer

Device driver for vivitar vivicam 3740


Vivitar Vivicam 3740 drivers img.php?i=ahr0cdovl2kuchjpy2vydw5uzxiuy29tl2ltzy91mi80lzcvny8xmdb4mtawlziymtexogwuanbn Manufacturer: Vivitar Device family: Photography Digital Cameras Operating system: Vista, XP

Some Vivicam 3740 drivers may be zipped. To install them, you will need the archivers WinZip or WinRar to unpack them prior to setup. If your Internet connection is unstable, use the download manager ReGet to simplify the downloading process.Before you install Vivicam 3740 software downloaded from our site, please make sure that the program really suites you. To download the necessary Vivitar driver for your device, click on the link below.

Nov 06, 2008 | Vivitar ViviCam 3740 Digital Camera

2 Answers

Uploading pictures from camera to computer


I would check Vivitar's website for a camera driver file you can download that would enable you to use it. Not sure what you mean by install file being locked. In general, I would upgrade to Windows XP (or Vista if your machine will support it, once they've gotten more bugs out). Windows ME is basically Windows 98 with some multimedia extensions, and not one of Microsoft's better efforts-it's also old, so not many updates will be forthcoming.

Jun 24, 2007 | Vivitar ViviCam 3826 Digital Camera

Not finding what you are looking for?
Vivitar ViviCam 3826 Digital Camera Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitar Cameras Experts

kakima

Level 3 Expert

100243 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Vivitar Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...