Question about Toshiba Projection Televisions

1 Answer

Double vision on tv

Recently i have purchased a 42inc toshiba tv rear projection. when i got the tv back to my house i noticed that the picture is blurred and looks like there is 2 of everything i have had the screen off and all the lenses are presenting this problem. i have done the convergance and also the electrical tuning but no better. any help guys ???

Posted by on

  • david gardner Feb 13, 2009

    thanks dan, this tv is new to me i checked it out befoe i baught it and there was no problem. only when i got back to my house there it was. i can solder its just the amount of components under there i was a bit weary to touch anythig at 1st but if i know what to do there is no problems



    cheers

  • david gardner Feb 13, 2009

    yea dan the details and instructions would be great. no the telle is new to me not bought new

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Is this a "new" set or just new to you? If new, don't waste any time on this. Return the set for an exchange. If new to you, then the problem is in the convergence circuit and if you can solder, you should be able to fix this yourself. Let me know if you wish to attempt the repair and I'll supply additional details and instructions.

Dan

Posted on Feb 13, 2009

  • ABRsvcs Feb 13, 2009

    Start with resoldering the pins on the convergence ICs. These are large black ICs attached to a heatsink that should be marked STKxxx. Keep me posted.



    Dan

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tmtmail.co.ukmy samsung projection tv has double vision and i dont know how to amend the lens can yu please help thank you


double vision in a rear projection tv has several reasons. one is convergence magnets are out of tune. u need to tune them which is back side of picture tubes. u please observe that which color is producing the double vision. the lens are firmly fixed & therefore need not to adjust. other option is to adjust the convergence of tv by going to service mode by remote.

Sep 13, 2011 | Samsung Projection Televisions

1 Answer

My Toshiba 53H71 rear projection TV's picture looks like double vision with a heavy tint outline how can I fix this???


Hi,
Double vision/ picture problem occurs due to failure of convergence output ICs in rear projection tv and it is common problem of projection tvs.
Please replace convergence output ICs in tv to solve the issue, there is convergence repair kit available for $70 on This Site that has required parts/ ICs, instructions about how to replace ICs etc for a handy person.
Hope these info will help.
Thanks.

Jun 11, 2011 | Toshiba 53H71 53 in. Rear Projection...

1 Answer

We recently moved the tv and now when we turn it on it has double vision. It kinda looks like a 3d movie. What could be the issue? Is it worth fixing?


Hi,
If tv picture was fine before moved then check dry/ cold solder joints/ connections on convergence output ICs and nearby circuit area.
Local tv repairman will resolder loose/ dry solder connections to solve double vision picture problem.
TV worth fixing if picture is good.
Thanks.

Feb 18, 2011 | Sony KP-57WV700 57" Rear Projection HDTV

1 Answer

Turns on and off then back on then off


Discovered bulb had blown out.
At power on button, red light and green light flashed and no picture was present. I opened side panel after unplugging tv and let the bulb housing cool, then removed the bulb and discovered it had blown. Luckily I had a replacement bulb from the purchase, replaced it and it worked again.

Oct 01, 2009 | Toshiba 52HMX84 52" Rear Projection...

1 Answer

57HX81 projection tv,color is mostly red and picture is double.


This is a convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually charge between $200-$300

Sep 28, 2009 | Toshiba 57H81 57" Rear Projection...

1 Answer

Blue blur on part of the screen...toshiba ultra vision


Do you normally leave this set on a specific channel...such as CNBC or BLOOMBERG tv...etc that maintains a regular scrolling image???

If so...on sets that are a few/several years old...the projection tv screens can develop what's called a "burn" or "burned image" on the screen...similar to wearing a path in your carpet from heavy traffic areas. Newer models do not have this issues...but many older ones do.

Jan 11, 2009 | Hitachi 57F500 57" Rear Projection...

1 Answer

Red Shadow on Picture


convergence ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 14, 2008 | Toshiba 61H71 61" Rear Projection...

1 Answer

Picture shadow on rear projection Sony big screen TV


OUR TOSHIBA HAS A DOUBLE VISION/BLURRIE PICTURE. THIS PROBLEM IS ALWAYS THERE. SOMETIMES THE PICTURE IS GREAT, BUT MOST OF THE TIME ITS BLURRIE/DOUBLE. LOOKS AS IF IT ALWAYS ON 3D!! ANY SUGGESTIONS? WE WOULD REALLY APPRECIATE ANY HELP WE CAN GET FROM ANYONE. THANK YOU!

Mar 03, 2007 | Toshiba 55H70 55" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...