Question about Hitachi 60GB Travelstar 5K160 Ultra ATA/100 Notebook ATA-100 Hard Drive

2 Answers

Harddisk not responding or booting -

Feed back from the local support shows the hard disk has no movements ;the drum not spinning...would realy appreciate anybody who can help me with this problem

thanking all of you for taking your time to read and think...

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

Check the power cable is it connected properly..if yes then you need to contact the Hitachi service center for replacement if it is under warranty..

Posted on Feb 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

This issue can be related to both the mechanical and electornical part of your hard drive. We could talk about a jam in the spinning section or it could be possible that the controlling chip which acts the drum is defective.

Posted on Feb 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hard drive not detected what can i do


If your hard drive is not being detected the moment you startup the computer, then try to turn it off and open the computer's casing. Pull the two cables connecting to your hard disk and wait for like 5 minutes before plugging the cables back to it. Then power it back and see if it gets detected. If not, then your harddisk might have failed. You might want to check it though thru the CMOS setup if the Seagate disk drive is still on the list of the Boot devices. If not, then you can do a data recovery by unmounting the harddisk from your computer and put it as a slave drive to another computer or to an external harddisk usb enclosure.

Should you need further assitance, please let me know. Thank you for using FixYa.

Dec 16, 2010 | Seagate Computers & Internet

1 Answer

I have a Western Digital MyBook Essential 320GB and it is not responding. The green light is on, but the disk isn't even spinning. I've had this thing for at least 4 years. Is it toast? The harddisk will...


If the hard disk is not spinning then the hard disk is faulty.
The adapter case may be OK especially when you plug it into a working computer's USB port and it detects the adapter but not the hard drive.

Oct 23, 2010 | Western Digital My Book Essential 1TB...

1 Answer

Storejet problem


Good day!

1. Go to my computer and right click then click manage, go to disk management and see if your external harddisk is showed.If showed,then you can see the options there to manipulate your harddisk, either you format it or repartition.
2. You can use also a disk manager software to fully control the function.

Jul 06, 2010 | Transcend StoreJet 2.5 (TS120GSJ25T) 120...

1 Answer

My boot screen shows secondary slave hard disk error press F1 to resume. if i press f1 it enters into bios setup and the i press esc discard changes logging into windows but secondary disk is not detected....


Check on harddrive you find jumper on it.
Then read on harddisk you can find there is specifiaction for master, slave and cable select jumper settings.
Put jumper as cable select then check.
Also reconnect sata or ide and power cable to harddisk.
Then check .
Let me know if you need more assistance.
Thanks.

Oct 02, 2009 | Computers & Internet

2 Answers

Hello Everyone, I have an old PC windows98 with maxtor 90840D5 hard drive. Sometime back I've removed the hard drive and attched it to the new PC, so as to access the old files.Today when I try reattach...


you need to detect your harddisk in bios setup.
For that when you power up the computer press "del" key to enter in bios.
Then check your harddisk is detected in bios.
If not cxheck power cable and ide or sata cable connected to harddisk.
Reconect both connection to harddisk then check.

Aug 01, 2009 | Maxtor DiamondMax 3400 (90840D5) 8.4 GB...

1 Answer

My computer didnt recognize my hard disk


Looks like the controller on the Hard disk has malfunctioned. I am afraid, that the Hard disk has to be sent to an expert nearby for Data Recovery. They would have tools which could be used for getting your data intact. But again it all depends on the level of damage to the Hard disk.You may get all / some of your data ot you may get none. Please consult your hardware vendor for this

Apr 13, 2009 | Western Digital Caviar 40 GB Hard Drive

1 Answer

Disk manager for seagate 160 gb sata barracuda hard disk


windows xp setup not creat the partation.
and not show the tha harddisk,but harddisk are showing the bios setup.
my system is ACER ASPIRE tower Casing.

Jan 10, 2009 | Seagate (ST3160827AS) 160 GB Hard Drive

1 Answer

250gb Maxtor External HardDisk not responding


How are you connecting it to your pc?  are you supplying external power?

Jan 01, 2009 | Maxtor Hard Drive

2 Answers

Barracuda hard disk 80gb


More than likely, since you say you did a DOS install of the OS, you did not set the FDISK parameters to set your primary drive. Insert the DOS CD you used to format the system. Boot to a DOS prompt and run the FDISK command. It should have an option, I believe it is number 2 or 3 to "Set primary drive". Select your hard disk 0 as this drive and you should be fine at rhat point.

Sep 17, 2008 | Seagate Barracuda 7200.7 ST380011A 80 GB...

Not finding what you are looking for?
Hitachi 60GB Travelstar 5K160 Ultra ATA/100 Notebook ATA-100 Hard Drive Logo

Related Topics:

753 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Hitachi Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...