Question about Sony STR-DE485 Receiver

1 Answer

Sp.off my reciver display red "sp.off", and i have no more sound, thanks

Posted by on

  • antoine_stev Feb 13, 2009

    I have no headphones inserted, thats the problem, Antoine

  • legaid Apr 13, 2009

    I have exactly the same problem - sound off, as if headphones connected , but they are not. I have even tried plugging and unplugging headphones in hopes that it would clear the problem but no go. Sometimes it clears just by hitting random buttons (and when it clears the red sp. off light goes off). I have also tried clearing the receivers memory (turn it off and turn it on holding down the power button for 7 seconds and it will go into a demonstration mode, but once you clear the demonstration mode there is still no sound).

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

ON the str-de485 the sp.off lights up when the headphone jack is enabled, do you have the headphones inserted?

Posted on Feb 13, 2009

  • Mike Lynch
    Mike Lynch Feb 14, 2009

    Wow! This guy will give you and inappropiate rate for just trying to help out, why didn`t you say you don`t have the headphones inserted, instead of shooting from the hip with a hot headed rating, OK well next time buy a higher end receiver and maybe you will not have a problem you have with the low budget Sony

  • mattglandry Dec 04, 2010

    i had the same problem...for me there was a button on the reciever that said "speakers"...pushing it turned off the light and i have sound now :)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do connect surround sound receiver to my tv


use the optical port (toslink cable needed)little square with flap will be lit red or use rca cables red and white audio out fron tv to any port on reciver(aux,cd,dvd,ect) the reciver will have to be turned to this for the surrond to be heard

Sep 06, 2014 | Onkyo TX-DS575 Receiver

1 Answer

Error code sc545


The Error Code SC542 or Sc546 could be a caused by a few reasons. There is a temperature problem with the fuser unit, the roller thermistor is bad, or the BCU Board is bad.
1 metode to reset Ricoh Error code sc542:
To clear the code:
Hit the yellow "Clear Modes" key
Press 107 on the number pad
Press and hold the "Clear Stop" for 10 seconds until you get a new screen ...
Press the "Copy SP" Button on the display
Open the front door
Turn front left power switch off and on
Shut the door
The error code is now cleared.
reset Ricoh Error code sc542:
To Enter and Exit the SP Mode
1. Press yellow "Clear Modes" key .
2. On the operation panel keypad, press 107 number
3. Hold down red "Clear" key more than 10 seconds.
The Copy SP is displayed.
4. Press "Copy SP" and go to the code SP5810, press "Execute"
5. To exit the SP mode, just press Exit in the upper right corner of the SP mode
screen. Power switch off and on and the error code is now cleared.


Hope this his helps, thanks for using fixya.

Aug 28, 2014 | Office Equipment & Supplies

1 Answer

Is there any way to reset the thermal fuse - it was just working fine, and then it said paper jam, now I get the SC-542 error code - how do I reset it first or get in the setup mode to reset the jam...


firs you go to SP mode while pressing

Starting SP Mode

1. Type the keys as follows:cleare mode button which appers in yellow color and continue the numbers 107

2. Press the cleare button which appers in red color and hold it down until the SP-mode menu is displayed (about 3 seconds) then switch OFF the machine and switch ON this process re-set the code -thanks

1 2 3

4 5 6

7 8 9

0 #

Jan 03, 2011 | Savin Office Equipment & Supplies

1 Answer

Problem with Plasma TV Philips 37FD9944/01S


i hve no reciver box but i done my job here plz help me in this problem ni reciver box then how i repair this plazma flat tv model no 37fd9944/01s help me

Nov 05, 2008 | Televison & Video

2 Answers

I have no reciving in a cobra 29 ltd chrome


Bad switch. It's that simple. The factory switches are crimp together junk. You may be able to use a pair of needle nosed pliers to softly squeeze the case of the switch together to correct the poor contact in side of the switch, but, if it gets a lot of use you may need to replace it altogether. Or try adjusting

Thanks!
Dodgem

http://dodgem250.angelfire.com

Apr 29, 2008 | Cobra 29 LTD CB Radio

Not finding what you are looking for?
Sony STR-DE485 Receiver Logo

Related Topics:

993 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...