Question about Xerox Phaser 8400 Laser Printer

1 Answer

Is it easy to refurbish the maintenance kit?

After paying over A$300 for a kit, is there a simple way to refurbish the maintenance kit for these machines or is it not possible for a person at home to do?

Posted by on

  • markleojohns Feb 14, 2009

    Thanks everyone. Anyone know what the oil is?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 237 Answers

You can do them yourself. The maintenance kit usually only includes the maintenance roller,what is yours coming with. The maintenance roller is taking out from the right side there is a little door there that opens and its an orangeish color

Posted on Feb 13, 2009

  • John Cole
    John Cole Feb 13, 2009

    O ic i mis read the question. you cannot refurbish the maintenance kit. It comes with certain oil on the rollers that help the drum.

  • John Cole
    John Cole Feb 14, 2009

    Not sure of the oil

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to enter into service mode ricoh 8300dn


Ricoh SP8300 SP mode (Service Mode)
To Enter SP Mode (Service Mode)
Do one of the following:
If the power is already ON, press the "Home" and
"Simple screen" keys at the same time for more
than 3 seconds, and then press the "User tool"
key.
or

If the printer is OFF Press the "Home" and "Suspend" keys at the
same time while turning the main switch on.

Reset for Maintenance Kit A or Maintenance Kit B
So the "Replace Maintenance Kit A" or Replace Maintenance B" message will go away.

Once in SP Mode (Service Mode) press the following:

"ENGINE"

"SP-7XXX" - "DATA LOG"

"7804" - "PM Counter Reset"

"6" - "ALL CLEAR"

"EXECUTE"

Jan 13, 2014 | Office Equipment & Supplies

2 Answers

The sprinter gives a message cleaning the paper path


Check* was paper physical length is matching to selected length? *check Maintenance kit interval. * check which tray you are getting this message? tray/tray 2 check pick up rollers are warn out? * clean paper path sensors.

Sep 30, 2011 | HP LaserJet 4250n Printer

1 Answer

80 scheduled maintenance will not print


There is a maintenance kit you need to get and install. Then you'll have to go into maintenance mode and reset the maintenance count. I don't remember the button sequence, but if there is a printere repair shop in your city, most likely one of their techs will tell you how to reset the count. But you really should install the kit first. It consists of feed rollers, charge and transfer rollers, and fuser. It's not difficult to install and the kit can be purchased with a refurbished fuser from many vendors at reasonable prices.

Mar 05, 2011 | Lexmark Optra T614 Laser Printer

1 Answer

I have an Hp laserjet 4200 printer and would like to know what regular maintenance I should be undertaking,and parts checking.


A maintenance kit(feed rollers, transfer roller, fuser) should be installed every 200,000 pages.
If you look at the "configuration" page, left column about 1/4 of the way down you will get the page count and when the last kit was installed.

The kit will come with instructions for installation and resetting the page count.
It is an easy printer to maintain.

Feb 08, 2011 | HP LaserJet 4200n Printer

1 Answer

Maint kit install and page count


Pretty easy, the maintenance kit consists of a transfer roller (black roller that sits underneath toner cartridge), charge roller (sits above toner cartridge), fuser (rear of printer behind two plastic covers), and paper feed rollers. The maintenance kit should have details with diagrams.

To reset
To reset the Maintenance counter, turn off the printer.
Press and hold both Select & Return while powering on the printer.
Hold until display reads 'Performing Self Test" then let go of the buttons.
If the printer displays "80 Maintenance Due" Press the Go Key.
Press the right Menu Key and scroll to Reset Maintenance Counter.
Press the Select Key. Press the Select Key again to reset the counter.
When the reset operation is complete, press the right Menu key to exit Configuration Menu and press Select.
Printer will save the settings, IPL and come back to Ready.

Oct 30, 2008 | IBM 4528-n01 Printer

3 Answers

Reset counter on Xerox Phaser 8200


I think the maintanance kit runs out based on time and usage, which ever comes first, roll back your printers clock a few months or more and see if that fix's the problem.

Oct 05, 2008 | Xerox Phaser 8200DP Thermal Printer

1 Answer

8550DP Maintenance Kit


First of all make sure it is the right kit. The part numbers for teh 8550 and 2424 are very close, one ends in 675 the other in 657, so they have been known to be mixed up.
then here is the documentation..

Problem:
The machine displays the Replace Maintenance Kit after the Maintenance Kit has been replaced.
Cause:
There may two causes for this issue.
  1. The machine does not recognize that the Maintenance Kit was removed. This would likely be caused by a defective Drum Maintenance Pivot Plate.
  2. The machine corrupts the CRUM on the new Maintenance Kit. This may be caused by a defective Drum Maintenance Pivot Plate or IO Board.
Solution: thumbsup.gif Fixed! thumbsdn.gif Did not fix.
  1. While the Replace Maintenance Kit message is displayed, remove the Maintenance Kit. If the displayed message does not change to "Maintenance Kit Missing," replace the Drum Maintenance Pivot Plate and install a new Maintenance Kit.
  2. While the Replace Maintenance Kit message is displayed, remove the Maintenance Kit. If the displayed message changes to "Maintenance Kit Missing," replace the IO Board and then install a different NEW Maintenance Kit. If the problem persists, replace the Drum Maintenance Pivot Plate and install a different NEW Maintenance Kit.

Apr 18, 2008 | Xerox Phaser 8550DP Printer

1 Answer

We have a Phaser 8560 Printer and we are getting the message "maintenance kit low" message. What does this mean and how do we fix it?


This will require servicing:
The maintenance kit contains a maintenance roller that keeps the surface of the Imaging Drum clean and oiled.
NOTE: Order a new maintenance kit when the Display Screen displays a message that the maintenance kit is low. Replace the kit when the Display Screen prompts you to replace the maintenance kit. Both a Standard Maintenance Kit and an Extended Maintenance Kit are available for the Phaser 8550 and 8560; however, only a Standard Maintenance Kit is available for the Phaser 8500. An Extended Maintenance Kit will not be functional with the Phaser 8500.

WARNING: The printer's interior may be hot! Do not touch the hot surfaces.

Once you have the part: instructions:
  1. Open the door on the right side of the printer.
  2. Grasp the maintenance kit (labeled A) from the maintenance kit slot and pull the kit completely out of the printer.
  3. Insert a new maintenance kit and push the kit completely into the maintenance kit slot. Follow the illustrated instructions included with the maintenance kit for full installation and disposal information.
  4. Close the door.
This will be on the right side of the printer.
This will need to be replace every 10,000 sheets of paper.

  1. Close the door.

Apr 03, 2008 | Office Equipment & Supplies

2 Answers

Maintanance kit replace


Problem:
The machine displays the Replace Maintenance Kit after the Maintenance Kit has been replaced.
Cause:
There may two causes for this issue.
  1. The machine does not recognize that the Maintenance Kit was removed. This would likely be caused by a defective Drum Maintenance Pivot Plate.
  2. The machine corrupts the CRUM on the new Maintenance Kit. This may be caused by a defective Drum Maintenance Pivot Plate or IO Board.
Solution: thumbsup.gif Fixed! thumbsdn.gif Did not fix.
  1. While the Replace Maintenance Kit message is displayed, remove the Maintenance Kit. If the displayed message does not change to "Maintenance Kit Missing," replace the Drum Maintenance Pivot Plate and install a new Maintenance Kit.
  2. While the Replace Maintenance Kit message is displayed, remove the Maintenance Kit. If the displayed message changes to "Maintenance Kit Missing," replace the IO Board and then install a different NEW Maintenance Kit. If the problem persists, replace the Drum Maintenance Pivot Plate and install a different NEW Maintenance Kit.
ETI v1.3.20.0 610606.Replace Maintenance Kit Message after it Has Been Replaced 2007-11-18 21:37:39

Mar 30, 2008 | Xerox Phaser 8400 Laser Printer

1 Answer

Maint.kit low


Order an extended maintenance kit. It is very easy to change, just slides in out and into the right side maintenance drawer.
Takes about 2 minutes.

Mar 18, 2008 | Xerox Phaser 8860MFP Printer

Not finding what you are looking for?
Xerox Phaser 8400 Laser Printer Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...