Question about NetGear WGR614 Wireless Router

1 Answer

192.168.0.1 & 192.168.1.1

They wont open!! help!!...cannot find servers??

Posted by on

  • Aenim4 May 11, 2010

    are you directly connected with ethernet cable to the router?
    does your pc have a fixed ip? you can check this in the network card options...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this problem. I noticed that when I would try to http to 192.168.1.1 (even after a reset) it would try to redirect me to the welcome page, but using a domain name that didn't resolve locally.

I think the address bar in my browser changed from:

http://192.168.1.1


to

http://routerlogin/welcome.htm

Assumptions:

You are able to ping the address, but unable to http to the setup page.

Solution:

Change the domain name portion to the IP address so DNS doesn't try to resolve it.

Example

http://192.168.1.1/welcome.htm


After you log in and perform the initial setup, it shouldn't do this any longer.

Hope this helps!

Eric

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm trying to setup a Ventrilo Server and Host it on one of my computers now the server program and everything else is right but the router wont allow me to access my server from another computer which is...


You will need to open the port you set the vent server to use via your router's configuration. You can find information on how to do this in your router's manual, or on the manufacturer's web site. This kind of thing is different from router to router.

Dec 28, 2010 | Belkin F5D7234-4 Router

1 Answer

My wireless wont work but my wired will, help


You will need to check the wireless settings of the router.
If your network is secured then make sure that you are typing the correct network key.
also make sure that the DHCP server is enabled on the router.
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.
Click here for step by step instructions

Jul 06, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Cannot access FTP server from outside.


your server need to connect on Internet with pubilc IP or fixed NAT with public IP

Apr 08, 2010 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

When using google alot of the sites I try and log into comes up 400 bad request. I can get into some sites but not facebook and some others. Looked up 400 bad request solutions on google but wont open....


This is web server error .The Web server (running the Web site) thinks that the data stream sent by the client (e.g. your Web browser or our CheckUpDown robot) was 'malformed' i.e. did not respect the HTTP protocol completely. So the Web server was unable to understand the request and process it. It almost always means bad programming of the client system and/or the Web server. Trty to check after some time or reset IE setting to default, also try to disable firewall and check. Good Luck.

Aug 28, 2009 | Routers

1 Answer

Can't Open Ports in my Router


Make sure that you set or assign a static IP to your playstation first through your dlink. This would ensure that your playstation would have its own ip address and wont change each time you restart your playstation. Once you have that fixed then you could use the virtual server and set it to open all ports for your playstation's ip address. If it still did not work then instead of using virtual server, try setting your Playstation as a demilitarized zone. If that still did not work I think it would be best to contact your ISP.

May 31, 2009 | D-Link DI-704P Router

3 Answers

192.168.0.1 & 192.168.1.1


U may try this website ip-details.U will get the solution.

Apr 14, 2009 | Linksys WRTP54G Wireless-G Broadband...

1 Answer

TW100-S4W1CA problem


Do you have the built in firewall turned on inside the router programming? Is the NAT firewall on? When was the last time if ever you updated the firmware on the router?

May 10, 2008 | Trendware TRENDnet TW100 S4W1CA...

1 Answer

Router cannot connect to servers


The ports that need to be open to connect to the game server are fowarded to your machine and can't be used by another connection. You'll have to release the ports with the router configuration utility in order for another machine to use them. Better still see if you can find out what range of ports the game can use and forward a different set to his machine. Then you can both connect at the same time.

Jan 18, 2008 | Routers

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...