Question about JVC KD-SH55 CD Player

Open Question

What does error 6 mean on my jvc KD-SH55 player?

What dose error 6 mean on my JVC KD-SH55 player?

Posted by on

  • MikeAngel1 Apr 13, 2009

    Same problem but i also have error 7

  • guido brunelli
    guido brunelli May 11, 2010

    Do you have and sound? If so there may be a problem with the software on the audio card and it is improvising by reducing output quality. If Error 6 flashes or scrolls and you have no audio the device driver needs reflashing or could be just plain damaged from abuse or possibly heat. I am somewhat unfimailiar with this code but i hope this at least helps.

×

3 Suggested Answers

  • 55 Answers

SOURCE: jvc kd-sh55 head unit

Have you tried pressing the "RESET" button on the stereo? I have a JVC unit in my car and the reset button is a tiny hole behind the detachable face. Take a pencil or a pen and insert the end into the tiny hole an hold for a few seconds. This will reset the stereo and you should be able to eject the CD as you normally would. If it's a mini-disc (8mm) you probably would have to take the unit apart and manually retrieve it - big hassle. Check the owner's manual to find out where the "RESET" button is if it is not behind the face. If you don't have the owner's manual, you can download one from jvc.com.. Hope this helps.

Posted on Aug 30, 2008

  • 85 Answers

SOURCE: I have a JVC KD SH55 and won't eject CD. Fix please. Recall?

there is a ribbon wire that connects the faceplate contacts behind the faceplate that always go bad on all radios with rotating faceplates. you can probably find this part on ebay or on parts.com or by jvc.

Posted on Sep 08, 2009

  • 55 Answers

SOURCE: i have a error message in my jvc kd-sh55

Try resetting the stereo. The reset button is located on the bottom left of the face plate. It is a tiny hole and you take a pencil or a pen and insert it in the hole and hold for a few seconds. This may work... Hope this helps.

Posted on Aug 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jvc kd-sh55 wont turn on


Check wiring if it is a new installation. If it failed, then check fuse. If fuse is good, then need service. Sometimes it could be due to the front panel. Call customer relations if it is in warranty.

Mar 08, 2012 | JVC Car Audio Receivers

1 Answer

Unit wont slide down for CD eject ERR 06


cd roller bars are bent ther is no ez fix replace deck

Jul 07, 2010 | JVC KD-SH55 CD Player

1 Answer

Cant get cd to eject


good day, you may want to do a manual eject, see the small hole that only a paper clip can fit? use a paper clip and insert it to the hole and it will eject the cd. hopefully next time you eject it it goes back to normal. hope this helps

Feb 11, 2010 | JVC KD-SH55 CD Player

1 Answer

I have a JVC KD SH55 and won't eject CD. Fix please. Recall?


there is a ribbon wire that connects the faceplate contacts behind the faceplate that always go bad on all radios with rotating faceplates. you can probably find this part on ebay or on parts.com or by jvc.

Sep 08, 2009 | JVC KD-SH55 CD Player

1 Answer

Just installed KD-SH55 JVC in Tahoe myself, no lights on but ejec


if it has a face plate and most after market radios do then it may not have a good connection check and make sure it does maybe even clean them with alcohol also make sure you got a good ground it may not have enough power to come on all the way (<-- rarely is the case) but it sounds like a bad radio

May 01, 2009 | JVC KD-SH55 CD Player

1 Answer

Cd player locked. make jvc


The problem was that we could not find the instruction book. However, eventually we found it and were then able to unlock the cd player.Thank you for your assistence.

Mar 19, 2009 | JVC KD-SH55 CD Player

1 Answer

"LEVEL" error message


Hello.

Hope this link to the user manual will help you with your problem..

http://caraudio.manualsonline.com/manuals/mfg/jvc/jvc_kd_kdg720.html

Good Luck.

Feb 10, 2009 | JVC KD-G720 CD Player

1 Answer

JVC KDSH55 REAR SPEAKER OUTPUTS BLOWN?


well it sounds like u may have blown the channel or your amp was powering your rear speakers

Dec 20, 2008 | JVC KD-SH55 CD Player

1 Answer

Jvc kd-sh55 head unit


Have you tried pressing the "RESET" button on the stereo? I have a JVC unit in my car and the reset button is a tiny hole behind the detachable face. Take a pencil or a pen and insert the end into the tiny hole an hold for a few seconds. This will reset the stereo and you should be able to eject the CD as you normally would. If it's a mini-disc (8mm) you probably would have to take the unit apart and manually retrieve it - big hassle. Check the owner's manual to find out where the "RESET" button is if it is not behind the face. If you don't have the owner's manual, you can download one from jvc.com.. Hope this helps.

Aug 30, 2008 | JVC KD-SH55 CD Player

3 Answers

I have a error message in my jvc kd-sh55


Try resetting the stereo. The reset button is located on the bottom left of the face plate. It is a tiny hole and you take a pencil or a pen and insert it in the hole and hold for a few seconds. This may work... Hope this helps.

Jul 14, 2008 | JVC KD-SH55 CD Player

Not finding what you are looking for?
JVC KD-SH55 CD Player Logo

Related Topics:

1,516 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio Receivers Experts

kakima

Level 3 Expert

96333 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

195 Answers

Are you a JVC Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...