Question about HP Bestec ATX-1956D 200w HP Part No 0950-4106 (ATX1956D) Power Supply

1 Answer

Upgrade for Bestec ATX-1956D (HP p/n: 0950-4106)

I need an upgrade for my Bestec ATX-1956D (HP p/n: 0950-4106) power supply. Minimal upgrade to 250 watts (e.g. At least 18 amps on 12v) but prefer higher capacity if available. Does anyone know of a Bestec or clone model which will work? (i.e. Same lines/plugs out and essentially same box)

If not, does anyone know of a site which provides cross-references for power supplies?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 53 Answers

How about the LC Power LC350M Micro ATX - 380 Watt

or the 

Logisys 350W Micro ATX

They should fit your form factor and output as much as 350W being relatively cheap, but neither gets 18 amps on 12V rail...
I think no power supply of that size has an output like that...think about a cheap but substancial chassis upgrade if you need that power...Have a look at directron for the PSUs.

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to troubleshoot Bestec ATX-1956D Power supply to determine if it is the power supply or another computer component..computer will not power up green light on power supply goes dim but does not flash...


The power supply is very inexpensive and can most likely be bought from any of your computer retailers, Amazon - Just make sure to confirm the right model type of power supply. BEST to have it tested before replacing it. To make sure that is the issue.. Many computer shops will test for free.

Oct 06, 2011 | HP Bestec ATX-1956D 200w HP Part No...

1 Answer

Problem with the HP Bestec ATX-1956D 200w HP Part No 0950-4106 Power Supply What voltage is P7 connector on this p/s and what is the pinout of this 3 pin connector... 2-black leads an a green lead?


Most computer testing facilities will test your current power supply for free. A replacement is very inexpensive to replace. Bestbuy, MicroCenter, small computer shops and buy replacemnent from Amazon.com, newegg.com.. Just make sure you have the correct information for your replacement. The model number on the power supply would be your best bet in most cases. Good luck and have a great day. I buy power supplies as low as $15 dollars Generic

Jan 16, 2011 | HP Bestec ATX-1956D 200w HP Part No...

1 Answer

The pc wont power up and the green led on the PSU is just flashing, is the bestec atx 250 12z broken?


Most likely yes.

I would also reccomend an upgrade to that PSU when replacing it.

Something in the 450-Watt neighborhood is usually a bit more robust.

Oct 15, 2009 | HP ATX-250-12Z, ATX-250-12Z REV.: D2, HP...

1 Answer

No voltage output


Would recommend replacing this unit instead of serrviceing it yourself it will cause adverse effect and may even smoke. These units once they dye there gone. If you need a diagram I would direct you to www.apex.com.

Apr 22, 2009 | HP Bestec ATX-1956D 200w HP Part No...

1 Answer

What is the p7 connector on a atx-1956-d for? the upgraded power supply has no provision for this connector? help please!!!!!!!!! gjohannsen@verizon.net


This is not a problem, and as it sounds, is not used in your system.

Some video cards have such huge processing power that they need thier own supply, as it would draw too much current from the motherboard otherwise. Below is a web site which reinforces this information, and gives an explanation of each connector.

http://www.affordablesurplus.com/bestec-atx-1956d-power-supply.asp

Or do I not understand you. Do you have one less, or one too many?

Apr 13, 2009 | HP Bestec ATX-1956D 200w HP Part No...

1 Answer

My part not turn on wt' can i do


Not worth wasting time diagnosing/repairing a bestec...

afraid to say purchase a new part...

Matt

Jan 22, 2009 | HP Bestec ATX-1956D 200w HP Part No...

1 Answer

I feel like an idiot but, I cant seem to find the fuse in my power supply. It is a Bestec ATX-1956D. Help please


don't feel too bad... i don't think you will find one externally on those... the fuse is usually soldered to the circuit board. what issue are you having ?

Robert

Jan 10, 2009 | HP Bestec ATX-1956D 200w HP Part No...

2 Answers

Upgrade for Bestec ATX 300 12E


Hipro- HP-P3527F3W
is the replacement for Bestec 300W

Dec 11, 2008 | E-Machines Bestec ATX-300-12E Rev. D 300w...

Not finding what you are looking for?
System Power Supplies Logo

Related Topics:

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP System Power Supplies Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a HP System Power Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...