Why are some types of hose colored white? - Garden

Type RECOVERY into the search box...follow prompts to reset this PC

Cat 5/6 cable connections - straight thru both ends the same.
cross over cable - one end type A other type B

TYPE A
wt-or
or wt
wt grn
blu wt
wt blu
grn wt
wt brn
brn wt

TYPE B
wt grn
gn wt
wt or
blu wt
wt blu
cr wt
wt brn
brn wt


Color Table
wt - white
or - orange
blu - blue
grn - greeen
brn - brown

wt blu = primary color is white with a blue stripe color
blu wt is primary color is blue with a white stripe

get a clean white rag and soak it up is it coolant color or is it clear water? coolant color or smell you have a bad heater core or hose connection to heater core is leaking. clear then you have a window seal or vent and possibly a pluged drain tube for the air cond. I don't know what state your in or water color so this is the best diag i can give but its a start for your checks

- the colors of the wires (can differ, depends on the case type):

• Green(+ is the colored wire)-White(-) --> POWER LED (GREEN light)
• Red-Black -> POWER SWITCH
• Red-White -> HDD LED (RED light)
• Blue-White -> RESET
• Red-Black (4 pins wide)-> SPEAKER

This is because of the audio video format issue. You select the TV type to auto (Advisable) or to the appropriate selection such as PAL or NTSC in the DVD player to get the better output with the color.
This selection you usually find in settings > Video setup> TV Type

Most Colour machines have three settings.

Auto Colour, Machine will determine if the original is Colour or Black and White from its scan. Then print in the format that best suits the original.

Full Colour, Machine will copy in full Colour regardless of Original type.

Black and White, Machine will copy or scan in B & W regardless of original type.

Hope this is of some help.
Ed

You may be typing white on white or black on black. Try changing the font color or the background color.

The wire that is white or most white and blue goes to green and the blue/white goes to red

Carl

The wall button gets the red and white wire. The safety eyes use the black and white wires. There are two types of attachments on the back of the openers. One has three screws. On this type the 1 is for the red wire, the 2 is for all white wires, and the 3 is for all black wires. The other type has four blocks and you just match the color to the wire color.