Question about Kenmore Elite 45986 Front Load Washer
Kenmore elite he4t washer
REplace your MCU. The MCU is the Drive Motor Control board and is located in the rear of the washer adjacent to the Drive Motor on the left-hand side (facing from the rear with the back panel removed). The wiring harness can also cause the error, but it is not as common a problem. Go onto kenmore.com and find your right washing machine and replace the part yourself. First try and take the wiring harness off and then reconnect it and see if the error code goes away if it doesnt then replace the part. Please Rate. Thank you
Posted on Feb 12, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 14, 2014 | Kenmore 4.3 cu. ft. Front-Load HE Washer -...
Apr 06, 2010 | Kenmore Elite 45986 Front Load Washer
Aug 27, 2008 | Kenmore Elite HE4 Electric Dryer
Dec 28, 2007 | Kenmore Elite 45986 Front Load Washer
Nov 19, 2015 | Kenmore Elite 45986 Front Load Washer
534 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: