Question about RCA D52W23 52" HDTV CRT TV

1 Answer

Convergence problem on rca model d52w23

So i decided that I cant do a small tedious solder job and I am going to part it out...the bulbs are still good along with everything els..email me before it gets scrapped sli20001@hotmail.com

Posted by on

  • sli20001 Feb 13, 2009

    well to late..thnks for info but I already went to far ..But Wait, listen ti this !!!! went to bestbuy to pick out new hdtv met and older couple there and there rear projection TV also went out !!! same day, now that got me thinking as we talked more..and with everything switching over to hd signal, seems we both have comcast and both rear projection hdtv`s ..now , call me crazy but I`m thinking this is all comcasts fault and with their update sent ia signal through the cable and fried the convergence chip.. does anyone one think that this is possible?




×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

Seriously, a service tech will cost you about $100 for the hour labor it will take to do the repair.

Posted on Feb 12, 2009

  • dhurt Feb 14, 2009

    No, that couldn't do it. But, a HD signal could cause them to run hotter by the sure fact that it's a higher frequency. Good luck with the new TV

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a model D52W23 and I have taken the back off but still do not see the bulb location. I see circuit boards but no bulb at this time. Is it located behind the circuit boards?


that model doesnt have a bulb it has three picture tubes. Chances are YOUR needING a deflection board for that model its the large board on the left side. You can get replacement deflection board from www.tvrepairworld.com

Sep 19, 2011 | RCA D52W23 52" HDTV CRT TV

1 Answer

My RCA D52W23 has 3 colors split.


Thats a convergence failure. You can get a repair kit called " The ITC222 and ITC222A convergence option missing repair kit" From www.tvrepairworld.com which should solve the issue. The kit also contains the CD with instructions.

Apr 02, 2010 | RCA D52W23 52" HDTV CRT TV

1 Answer

Convergence option in set up is gone. Picture is messed up


Ur convergence it dead.Know how to solders?Tries these websites for convergence kit.Tv repair World.com,Tv repair kits.

Dec 02, 2009 | RCA D52W23 52" HDTV CRT TV

2 Answers

I have an RCA D52W23 TV convergence problem


bd pt no is 264103 check your local rca dist and servicers

Oct 23, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

RCA D52W23 52in HDTV red and green ghost and bowing lines


Ur convergence it dead,need convergence kit,use what in that kit,U know to solder? Tries websites Tv Repair World.com,Ebay.com

Oct 06, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

Convergence problem


Did you replace the convergence power supply board, or the Convergence board?

Sep 23, 2009 | RCA D52W23 52" HDTV CRT TV

3 Answers

Rca d52w23 has distorted picture. it is shaped


Go to menu then setup look for convergence if not on menu you have a blowed fuse FL231 will be next to FBT flyback transfomer on right side there is 3 in a roll small brown looking caps but they are fuses it will be the one in the middle.You can take a pair of plyers to pull off top they are all removeable and just snap back on.

Sep 15, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

RCA Rear projection had a 3-d like picture. one red one blue and


Go to menu then setup if you do not see convergence on menu then FL231 is open replace it then do auto convergence.

Jan 02, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

Convergence problem on rca model d52w23


Replace convergence board or repair it. Try this with TV off Press and hold vol-and ch- at same time hold untill set comes on Now you should be in service menu Go to convergence Adjust the 16x9 mode.

Dec 21, 2008 | RCA D52W23 52" HDTV CRT TV

Not finding what you are looking for?
RCA D52W23 52" HDTV CRT TV Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69570 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...