I have recently bought a new Epson SX200 all in one printer and on installing all the software off the Epson web site for the printer i noticed a problem! The software can see the printer but the printer wont talk to the comp also the green & orange light on the printer keeps flashing! so i did the sensible thing and checked the ink cartridges were in properly and the right ones and to my amazement they were i am stumped and have tried everything and would like some assistance if there is anyone out there that can help i am all ears cheers Dan.
According to epson manual it may take 2.5 minutes for the printer to be ready for printing. Leave printer turned on. Do not press any buttons or load paper. Light will go to solid green when printer is ready. This link will let you download startup manual.
ftp://download.epson-europe.com/pub/download/3210/epson321000eu.pdf
Fiend your solution direct from EPSON. Here is your solution...
http://www.epson.com/printer/prob676ijt65/solution
takiqq23
2,171 views
Usually answered in minutes!
printer had red flash light
×