Question about Canon imageRUNNER C3220 Color Copier

1 Answer

Double vision My copy is blurred double vision....does anyone know what i can do

Posted by on

  • helen56 Feb 12, 2009

    This was done and did not work. Thanks

  • Anonymous Mar 31, 2009

    I've been getting a blurry print when printing in color. My serviceman says that it is because its dirty. That was yesterday and it's blury again today, not even 24 hours. Does anyone know what the problem Is?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If you are printing color and you have color blurring like streaks. it mean the registration of the colors are off. Usually using the internal cleaning function from the panel will clear this up. You should restart the copier as well. If it continues check all the feed rollers.

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magic focus is not clearing my problem ..what can be done ?


disconnect and reconnect to reset...then double check all settings and wiring...also, clean for any dust particles

Feb 05, 2012 | Hitachi 43F300 43" Rear Projection...

1 Answer

Red color, lines doubled . doubled vision. blurred vision


replace the convergence ICs and check the low ohm resistors also.

Jun 30, 2010 | Televison & Video

1 Answer

Bottom lft of tv looks like turning page, picture blurred and word double-vision


Hi,
TV needs convergence output ICs replacement as existing got defective and causing above said symptoms.
Let me know if you have additional question.
Thanks.

Jun 21, 2010 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Turned the tv on and the bottom left looks like a turning page, picture is also blurred and words are double-vision. can this be repaired


Hi,
TV needs convergence output ICs replacement as existing got defective and causing above said symptoms. These are two big black ICs on D board of tv that will be replaced.
Let me know if you have additional question.
Thanks.

Jun 21, 2010 | Sony KP-57XBR10 57" Rear Projection...

1 Answer

Double vision


you need the convergence repair kit which contains the replacement parts and the detailed instructions on how to do the repair. The JVC AV48WP30 -AV65WP30 convergence repair kit is available at the following link under the JVC repair kit category. The Instructional CDs are very detailed so its a easy repair.
http://www.tvrepairworld.com/

Jul 13, 2009 | Televison & Video

1 Answer

Mouse keeps freezing Images regularly get blurred like double vision


had to say! but may be due to lack of system memory?

Aug 05, 2008 | Computers & Internet

1 Answer

Double vision


Rebuild convergence amp circuit.......use kit # X480293......
follow kit instructions.................T.

Apr 19, 2008 | Hitachi 43F300 43" Rear Projection...

1 Answer

Blurred/double vision Samsung HDTV 1080i projection


Your convergence ICs are bad and maybe the two resistors right next to them. This is an easy and inexpensive repair if you can solder. A repair shop will run about 400.00 The parts are readily available for about 10.00 each you will need two ICs STKXXX-XXX
Look inside your set for a large aluminum heat sink that's where hey are located they will have an STK number like above stamped on them. Those are the part numbers. Let me know what type of TV and model number you have and I can help you locate the proper parts.

Jan 24, 2008 | Televison & Video

1 Answer

MODEL 53FDX018


Faulty alignment mechanism or colour wheel.

Jul 27, 2007 | Hitachi 53FDX20B 53" Rear Projection...

Not finding what you are looking for?
Canon imageRUNNER C3220 Color Copier Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

101642 Answers

old marine
old marine

Level 3 Expert

1717 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...