Panasonic Panafax UF-550 not receivng faxes

Apparently, you can set it for the default condition or you
can set it for the current fax you are sending.

To set the default:
1. Press "Function" then "74" then "Set"
2. Press "12" then "Set"
3. Press "1" for OFF
Press "2" for ALWAYS
Press "3" for INCOMPLETE only
4. Press "Set"
5. Press "Stop"

If you want to over-ride the default for the current fax,
1. Press "Function" then "8"
2. Press "1" then "Set"
3. Press "1" for OFF
Press "2" for ON (always print out)
Press "3" for INCOMPLETE only
4. Press "SET

Thanks to FixinFax for the clue for the default setting.

Alex Cook

press

function
74
set
12
set
2
set

stop

Press

Function
71
set
enter date and miltary time
set
stop

Press

Function
74
set
12
set
2
set
stop

this code 054 =


Communication error occurred while transmitting.



1. Reload the document and send again.
2. Check with the other party.

That code is for a bad LASER unit.

Try a new toner cartridge first.

Check here: UF-550/560/770

Paul,

Seriously, fax machines are designed to have their own dedicated analog phone line.

You can get a fax/phone switch from Radio Shack to hanle this problem.

go into service mode then into ram initialize and do all job clear. yo avoid this happening again set "inc. file save to invalid"