Question about Champion CG Dishwasher

1 Answer

Where can i find a trouble shooting guide for this unit

I am having problem with the water heating up it a champion model 44

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 86 Answers

The wash tank heating element is control by 1. the dual Float switch 2. The temperature control 3. the high limit thermostat 4. Contactor 5. tank heat fuse 6 element itself. Hope this help. God Bless.

Posted on Jul 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a DW60CKX1 dishwasher when I select normal wash , about 10 min into the wash it flasher E10 what do I do


Rose, error code E10 means no water or trouble with water supply or drain hose not connected properly. I will post your manual pg. 43 is trouble codes and pg. 44 to 46 is trouble shooting section. If you are not comfortable doing necessary repair call a good appliance tech. to diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
https://www.fisherpaykel.com/download/user-guide/Kitchen/Clean/Dishwashers/590719b-nz-au-dishwasher-dw60ch-dw60chp-dw60ck-guide.pdf

Aug 02, 2016 | Dishwashers

1 Answer

Can't light pilot light on hot water service. Gas to property is connected as the gas stove works.


There should be a trouble shoot guide on the hot water tank. I have had to do this many times. You just need to read the trouble shooting guide & be very careful. I hope this works for you.
D :)

Feb 01, 2013 | Water Heaters

1 Answer

Trouble shooting guide for refrigeration


GO to support on the manufacturers website. Enter your model number and download an owners manual. in it you will find a trouble shooting guide. murf427

Aug 04, 2012 | Refrigerators

1 Answer

I have a samsung ac unit, i'm not sure the model, but as the unit is running i sometimes heard an electrical poping noise coming from inside the unit. Could this mean that the circuit board in the unit...


sometimes the popping is the circuit getting wet.

Hello, Here is a trouble shooting guide for you and some details of how to fix it based on your symptoms. Here is a link to go to and make sure you jump around the site, it will tell you the fix based on your problem off the trouble shooting table. Link is below , copy and paste in browser. If this helped you, please rate it and some kind words are nice. Thanks Mike

http://home.howstuffworks.com/home-improvement/heating-and-cooling/how-to-repair-room-air-conditioners1.htm

Sep 02, 2011 | Samsung AW0505M Air Conditioner

1 Answer

Power is out at the controller. When I flip the main power switch (side of house, connected to whole unit) on and off, the power to the controller comes back on. Then I turn on hot water at tap, power to...


Try turning on hot water before reseting power. You can go to Noritz.com and get a trouble shooting guide (manual) for your unit make sure you have the model #

Dec 21, 2010 | Noritz 6.9 Gallon Residential Direct Vent...

1 Answer

I have a landa hmp-4-3500 heated pressure washer and i am problems with the water heater. where can i find a trouble shooting guide for this machine


Landa does not have a model HMP so I am not sure which machine you have. If you can provide a full model and serial off of the model tag on the machine I can provide you with a digital copy of the manual you are looking for.

Sincerely,
Aron Kerr
Landa Northwest
www.landanw.com
800.247.8103
503.255.6508

May 19, 2010 | Honda Landa PG 3500 PSI Pressure Washer

1 Answer

Heat pump trouble shooting fema trailor i have a az75h18dacm1 self contained air cooled heat pump that wont work. cant find any info on this unit. have replaced the stat,the fan comes on only if it want's...


Normally the Fan only comes on when it is called for by the compressor, here is their web page that you can go to and pick your model and get their trouble shooting guide to repair your system, they also have a 800 phone number to help you. I am familiar with the unit but you need to look in there trouble shooting guide to properly troubleshoot your problem, you can call there 800 number and ask for help as well. Hope this helps.
http://www.rheem.com/Products/Heating_and_Cooling/

Mar 01, 2010 | Heating & Cooling

1 Answer

Water is too cool for shower. Is there a thermostat?


I do not believe there is a separate thermostat. However the installation guide: http://www.eemaxinc.com/assets/files/FLOCO-install.pdf gives some trouble-shooting steps. More detailed trouble-shooting is here: http://www.eemaxinc.com/assets/files/floco-trouble.pdf

If the indicator light is off when the hot water valve is open: check your circuit breaker and the flow rate of water into the water heater (it must be over 1/2 gallon per minute). If those are okay, check the resistance of the element with a multimeter - 20 Ohms or less is good, 10,000 Ohms or so indicates a bad element. The trouble-shooting guide indicates the proper points to test.

If the indicator light is on, then check the flow rate at the shower head or faucet (reduce the flow until the water comes out hot), check that the unit is installed to the correct voltage supply and the resistance of the element.

If those are okay, then check that the printed circuit board is correctly installed and that the inlet filter isn't clogged.

After that, it's call the company for their technical support.

Cindy Wells

Dec 18, 2009 | Eemax EX95 "Flow Controlled" Electric...

1 Answer

Microwave won't heat up while in use


It sounds like the unit is in demo mode, they usually have a small d on the screen, try holding the "kitchen timer" pad down for 5 seconds, it should then work, if that doesnt apply to your model look in the trouble shooting guide of your owners manual, it will explain how to deactivate "demo" mode there...Phil

May 18, 2009 | Kenmore 63252 Microwave Oven

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Champion Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Brad Brown

Level 3 Expert

15133 Answers

Are you a Champion Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...