Question about TORK Hardware & Accessories

1 Answer

LIGHTS TURN ON AND OFF ALL THE TIME

I have a PC 10 senser in the ceiling and the lights are going on and off at will. Nobody touched the settings under the cover.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

Loose connection to the senser wiring or light or light or a  bad  senser itself. Bypass sencer and if the light then stays on, the senser is bad and wil need to be replaced..

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The lights flicker on and off when powering on


Your Minka Aire is also available on AMAZON...

The trouble you are describing involves YOUR control module INSIDE your fan body... I had a SIMILAR TROUBLE on a CASA BLANCA... had to replace the CONTROL MODULE myself... but for the 13 foot ceiling... and needing to ALSO upgrade the WALL SWITCH (Intelli Touch W32 Wall Control) to match... It was an EASY JOB.

Remember to ground out your hands before touching delicate electronic equipment (or an anti static wrist strap)...!!

Also remember... the REAL PROFESSIONALS always remove power (when possible).

Be SAFE.

To VERIFY, Technical Assistance... and get PARTS

Check out the links below or call:

Fan Man Lighting
15465 Cedar Ave S
Apple Valley MN 55124
(952) 898-2754 local
(866) 600-FANS (3267) toll free

Hours of Operation (Central Time)
Monday - Thursday
10:00 - 7:00
Friday 10:00 to 5:00
Saturday 10:00 to 5:00
Sunday 12:00 to 5:00


Fan Man Ceiling Fans and Lighting

Your search returned the following results

Fan Troubleshooting

Jan 26, 2016 | Minka Aire Ceiling Fan

1 Answer

How can I turn off the lights on a ceiling fan?


Try to find the breaker that controls power going to that fan/light, turn the breaker off, wait 5-10 minutes, then return breaker to the on position, doing so 'may' be able to reset the control board inside the fan itself. If this has no success, the lighting control board is malfunctioning, if still under warranty, you have options outside of replacing the complete fixture.

Aug 17, 2014 | Dryers

1 Answer

Hunter ceiling fan light turns on but goes out until it cools then comes back on by itself


The globe getting too hot is common with discharge lights but have standard lights. What type of circuit protection do you have as normal overload trip the breaker. I would suggest experimenting with one globe in to see if the problem persists. If it stays on you have to go down to 25w globes - which would still be a touch high at 75w but better than 120w. This could be too dark for you though so an additional wiring solution might be needed

Mar 07, 2013 | Dryers

1 Answer

Touch pad all lit up on GE 30 " slide in range


locate service manul / wiring diagram comees with all usually convenietly located taped to back inside pannel. shut off breaker , or slide out an unplug, read, manul if present plug back in fallow the set up steps,an trouble shoting. press,bake, set temp,and press start press timer,set timer ,and,press start again.should do it,.if not check for loose wire on oven senser.possible touch pad replacement. worst case. good luck
,.

Feb 22, 2013 | GE Ovens

1 Answer

I have a ceiling fan with lights, last night the fan was turned on for the first time since summer, the remote is over the light switch. The remote to turn on the lights is used normally. Since turning...


There is a small relay in the ceiling fan causing this noise, try turning off all power to the ceiling fan and allow it to set for a couple of minutes. Turn it back on and see if it goes away. If it does great. if not, it may not be worth the repair cost but it can be fix by an appliance tech.

Dec 22, 2010 | Hunter Heating & Cooling

1 Answer

Intell-Touch instructions for casablanca fan/light


Light Operation: With the light in the off position press and hold the light button (do not let go). The lights should start at a dim setting and gradually get brighter and brighter. When they get to a setting you desire let go of the light button. To reduce the brightness of the light you must first turn the light off, and then press the light button and hold it in as described above. If the light is off, and you press the light button quickly to turn it on, the light will go back to the previous setting. So if you last had the light on the high setting, it will go back to the high setting, if you had the light at a lower setting it will turn back on to the lower setting. Keep in mind you can increase the light intensity at any time by pressing and holding the light button, but to decrease the light intensity, you must first turn the light off, and start over by pressing and holding in the light button.
Fan Operation: With the fan in the off position, press and hold the fan button (do not let go). The fan should start at a slower speed and get faster and faster. When the fan is at the speed you desire, let go of the fan button. To slow down the fan speed you must first turn the fan speeds off by pressing and releasing the fan button. If the fan speeds are off, and you press the fan button quickly to turn it on, the fan will go back to the previous setting. So if you last had the fan at the highest setting, it will go back to the high setting, if you had the fan at a lower setting it will turn back on to the lower setting. Keep in mind you can increase the fan speed at any time by pressing and holding the fan button, but to decrease the fan speed you must first turn the fan off, and start over by pressing and holding in the fan button.

Jul 20, 2010 | Casablanca Fan (3232A) Ceiling

1 Answer

We have a Hampton Bay ceiling fan (about 10 yrs old) don't know the model. It will only turn 1 speed? When trying to change speeds with the chain pull it stays the same. It quit working for a while and I...


the fan changes speed by inserting a capacitor of different values in series with the motor .. direct drive to the motor is the fastest speed .. a large capacitor in series slows it down a bit and a smaller capacitor slows it down more ... so if your fan is running at full speed all the time then one of the capacitors is shorted or the switch is bad .. if its stuck on one of the lower speed settings then the switch has a bad contact .. the capacitors are mounted together in a small box with several wires going to the pull chain switch .. you can replace the capacitor box .. and you can replace the 3 or 4 position switch ... or you can remove all that stuff and put in a remote controled system .. that involves a box that just fits inside the fan .. it is hooked to AC power and neutral .. it then hooks up to the lilght and the fan giving you control over both .. you can vary brightness and fan speed .. you would no longer need the fan or light pull switch or the capacitors ... you could also get a new fan having such a controller .. since yours is fairly old it might be worthwhile to upgrade .. some of the remote controls allow you to set a temperature ..if the room goes above that temp then the fan turns on automatically and the speed is determined by how much higher the room temprature is from that set value .. some remotes also give you an additional very low fan speed .. thats nice at night when you just need a gentle breeze .. some also allow you to set a delay before the lights go out after you have clicked "turn off" ... that gives you time to exit the room or get in bed before the lights actually go out ... kindof nice features that might make it worth while to up grade .. to get parts for your old fan see this URL
http://www.ceiling-fans-n-more.com/hampton-bay-ceiling-fan-parts.php

since Home Depot sells hampton bay .. then they might have parts as well .. worth a try .. you can also see new models there ..

Jun 06, 2010 | Hampton Bay 52 In. White Redington...

2 Answers

I have a Hunter fan with remote. The fan or the light comes on by itself with no one around


See my post below: (Sorry, we're in the same boat)

Hunter ceiling fan with remote, have 5, 4 are seriously impaired! Lights dim to half strengh after variable time 10 seconds-30 minutes. And lights or fan turns on randomly (come home & fan on full blast), and one in which the lights won't dim (just blinks when try to dim)! Hunter "kinda" admits there is serious problem with remote but doesn't have a solution. Tells people to try changing to different code due to possible interference (pain in **** to change code on ceiling base!), was totally ineffective. Then replaced receiver in ceiling base (another total pain) in 3 fans with new ones sent Hunter, still totally useless. Hunter's suggestion, don't use the remote, just use the pull chain. If I had wanted a pull chain fan, I'd have bought a pull chain fan. TOTALLY USELESS! Moral of story: If you want a remote ceiling fan (my friend found out that all their remotes are made by the same company in Taiwan), don't buy Hunter!!!!! P.S. I found a "Kinda"- fix for the lights dimming to half strenth. After turning on the lights, wait 1 second, then dim lights slightly, they will then stay on the strength that you dim them to. - P.P.S. When I changed the receiver in the one where the lights won't dim, it "solved" that problem...Now it has the same problem as the others, lights or fan turn on randomly!

Apr 02, 2010 | Hunter 52" Ceiling Fan With Light And...

1 Answer

Dash lights go off for weeks, then pops back on for a day.


sounds like a module problem maybe the senser module. could be a short also.? try that

Nov 17, 2008 | 2002 Buick Regal

1 Answer

MAZDA MX6 1993: 4WS & Fuel lights on


Usually there is a senser on your disk pad with the wire connect to the light, when the pad is too low, the senser touch the disk rotor and grounded, the light is on.

If you do not use the original disk pad from the dealer, the senser is not build in, when you put the disk pad, must put right and connect the wire right, otherwise it will go on. No harm at all. just one pad didn't right, the light will on.

I don’t know what pad you put in.

About the fuel light;

How long the light going on or just a little while?

Jul 10, 2008 | 1993 Mazda MX-6

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top TORK Hardware & Accessories Experts

rgbypoet

Level 2 Expert

162 Answers

xboa721

Level 1 Expert

37 Answers

Are you a TORK Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...