Question about Symphonic ST420FF 20" TV

Open Question

Remote code for 27" Emerson EWF2703 Dish network

We have the dish Vip722 HD/DVR reciever installed.  Everything works great but tv 2.  The remote won't control the emerson SD tv at all.  Our 322 remote worked with it however.   I've tried scan mode, all the codes, even the 322 codes.  I tried the Funai codes as well.   Nothing.  

Any ideas?


Thanks in advance.

Posted by on

2 Suggested Answers

  • 1274 Answers

SOURCE: i have dish network remote controle and it dosn't

632,657,662,677,692,697. hope this helps..

Posted on Mar 25, 2010


BeckiB_DISH
  • 286 Answers

SOURCE: i need a code for my symphonic tv that is

Hello, you may have already gotten this information, but here are some simple steps to get that remote working for your tv. The link below will walk you through a power scan, where you can scan the tv to get the correct code for the DISH remote to your tv.

http://www.dishnetwork.com/SupportSection/power-scan-instructions

and also, here is a link to the codes for the tvs. I hope this helps!!

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml


Becki Barned
DISH Network Customer Service

Posted on Jan 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the code to go whith the spongebob tv on the dish network


I would suggest using a Power Scan to program the remote to this TV, if this doesn't work there is a compatibility issue.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Mar 27, 2011 | Emerson SpongeBob SquarePants TV

1 Answer

Need to program dishnetwork remote to tv


We would be happy to help you with getting your DISH Networkremote to control your TV. Pressand hold the TV button located on the top of your remote until all mode buttonback lights come on, then release. Use the number buttons to enter thecodes for your Emerson TV; here some of the codes we currently have: 764, 632, 648, 672, 654, and 516.Press the pound (#) button. To check that the code works try several differentfunctions on the remote to make sure it will properly operate the TV. Keep inmind that some codes may not be compatible with your equipment. If this is thecase, please try the other codes listed for that device until you find one thatis compatible with your equipment.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 21, 2011 | Emerson SpongeBob SquarePants TV

1 Answer

I need to program my dishnetwork remote model 6.0 ir/uhf pro to the tv. Also, I have hooked up a gamecube system to it, but cannot get the game system to come up on the tv screen. I am hoping the remote...


We would be happy to help with those two issues. First let's address your DISH Network remote to your Emerson TV. To check that the code works try severalfunctions on the remote to make sure it's the best code to use with your TV. Rememberthat some codes may not be compatible with your equipment. If this is the case,try the other codes listed for that device until you find one that iscompatible with your equipment. Remember to put your remote back into SAT mode once you're done.

Once you have your DISH Network remote programmed to your TV getting the game system to come up on the TV should be a matter of getting your TV on the input you have it connected to. This can be done by pressing the "TV/Video" or "Input" button on the DISH remote when it is in TV mode. If you are still having trouble with getting the game system to come up on your TV, call the Emerson Customer Service Department at: 1-800-256-2487.

We hope that this information gets you up and running. Thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 21, 2011 | Emerson SpongeBob SquarePants TV

1 Answer

I have dish network and I am unabe to get the dish network remote to control the tv power and volume. Whenever dish gives me a code it works for a few days then the tv rejects it. I have a 27 in orion...


1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

If this doesn't work and you have an LCD TV turn off the back light. As it is probably causing interference this is found in the TV menus.

Daniel Busa
DISH Network Customer Service

Feb 06, 2011 | Orion STV2763 27" TV

1 Answer

Need a romote code for HRS URC-383 for my emerson 27 inch flat screen.


If you are using Sky Remote then you can try to use these codes 0742, 0205 or 0206 for you Emerson TV which will work on all versions of the handset.

these are usually generic codes and may well work on the HRS URC-383 remote as well


Oct 04, 2009 | Emerson EWF2703 27" TV

1 Answer

Need an Input to hook up Dish network/xbox 360


Sometimes its tricky with those buttons on the front but with most tv's you can get to the menu and change inputs.
One you figure that out you will want to go back in and add that input as a channel in the add/remove channel section then you will be able to get to that input by just changing the channel down below 2
( another way to do this would be to run the auto program with the devices on and see if it adds them that way)

Sep 18, 2009 | Emerson EWF2004 20" TV

4 Answers

Comcst remote control code not working


look on the label on the back of your Emerson TV. Read the small print and see if there is a possible different manufacturer that actually made the Emerson TV. Just because it says emerson doesn't mean emerson made it. Also if no luck there try the UL listing code and search that code to the UL listing website. That may help also.

C-Dog

Feb 12, 2008 | Emerson EWF2703 27" TV

1 Answer

TV Channels


SOUNDS LIKE WHAT HAPPENED TO ME WHEN THE CHANNEL GOT ACCIDENTALLY BLOCKED AS AN UNUSED CHANNEL CHECK YOUR MENU ON REMOTE FOR ADD AND REMOVE CHANNELS AND RELOAD THAT CHANNEL AS INSTRUCTS IN MANUAL FOR THE TV

Jul 17, 2007 | Emerson EWF2703 27" TV

Not finding what you are looking for?
Symphonic ST420FF 20" TV Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68250 Answers

Cindy Wells

Level 3 Expert

4756 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Symphonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...