Question about NEC Electra Elite DTU 16D-2 Corded Phone

1 Answer

Trying to change display name on phone

I am trying to change a display name on a phone that used to have another user. I can not delete her name and I can't space it out either. Can you help me with this? I just want to know how to add the new name and delete the old one. The phone directions aren't very helpful.

Posted by on

  • 1 more comment 
  • Anonymous Feb 12, 2009

    How to change name at a nec phone

  • sgreene899 Feb 13, 2009

    I have the same issue and have read the manual no luck.

    Gone into pers setting to CID but it stops there.

    Let me know if you solve this problems.

    I was told to call the phone co!

  • surfcfo Apr 02, 2009

    What is the "Station name assignment from the attendant position"?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 63 Answers

Station name assingnment from the attendent position.Press the feature key then dial 25
enter station number using the dialpad.
enter the station name using dialpad.
use the following:
# key to move the cursor right
conf key to move cursor left and clear last entry.
press feature key when finished.

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I delete from the directory?


Try the following:

press [directory] (the phonebook icon, top center)
scroll to the entry to be deleted
press [delete]
display reads "Delete Contact?"
press [select] to confirm
display reads "Deleting..."
display reads "Contact Deleted", (chirps)
display shows the next entry in the directory

Good luck!
-------------

Feb 23, 2016 | Vtech Phones

1 Answer

I'm trying to change the display names for each extension but when i try the **266344 a user id option pops up....not for a password. What do i do?


Try pressing the FEATURE button then, **266344. On some Norstar phone systems there is also an Admin level of programming that is useful if you only need to change the names or the time. To access Admin programming, press Feature**23646(spells admin on the dial pad). Then 23646 for password.

Feb 24, 2011 | NorStar T7316E Corded Phone

1 Answer

I am trying to change a name on our systems telephone speed dial list and we have a KX-T7630 any help will do.


This name is stored in the main system processor, not the phone. On the phone, key in *#1234. display shows "sys Prog.
Key in 002 then press NEXT. Disply shows Sys SPD. Name . Enter the speed dial code that you use for the name you wish to change i.e. 000 to 999 followed by NEXT. The existing name will show on the display. Using the keypad, just like your mobile 'phone, key in the new name. For example, for John you would key in 5, then the button under the display with J, then 6 and the button under O etc. When complete, press the button marked "Auto-Dial/ Store followed by the hold button followed by program button

Aug 25, 2010 | Panasonic KX-T7630 Corded Phone

3 Answers

I am trying to change the name displayed on my nec i-series phone. How do i do this?


Assuming you are not an NEC trained Tech and your system is on a IPKII, You will best served by acquiring the IPKII Instalation manual and the Feature and services Manual.
This is not the kind of simple change that the average end user should attempt although I would agree that it is a feature that should have been made availiable to the average user because of occasional movement in
any office environment.

Jul 22, 2010 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

I am trying to delete an employees name from an extension


Programming2.gif is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key. (or the clear key to erase)
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Nov 06, 2009 | NorStar Meridian M7310 Phone

6 Answers

Programming a Name in Toshiba DKT3020-SD


To edit display name on LCD DKT3020-SD.

Follow this sequence:

Mode
Scroll
Enter passwork - 0000 is default
Hold
Hold (again)
DN ID (This is your phone extension #)

Old name should now be displayed. Hit page button to delete letters, scroll button for space.

Use characters for the the associated number key to enter desired name. For example if you want an "F" you would hit the 3 button 3 times. After your name is entered, press hold. Pick up and put down receiver.

Mar 11, 2009 | Toshiba DKT3020SD Corded Phone

1 Answer

Trying to change the name on the display on the phone


Dial 700>dial your ext #>enter name>press Hold & press Speaker

Feb 13, 2009 | NEC Dterm DTP 16D-1 Corded Phone

1 Answer

Your Toshiba Name Change question of Apr 2008


Maybe I can help, Press ( DN ) + #621
Display changes to USER NAME ?
Enter new name
Press SPKR

1 - moves right
* - moves left
# - toggles between alpha mode / numeric mode
0 - scrolls the alpha / special characters

To blank out any portion of name press 1 ( in alpha mode ) and move cursor to thr right
Good Luck

Aug 05, 2008 | Toshiba DKT-2020 Corded Phone

1 Answer

Initialising Mailbox


To Log Into System Administration:
1. Enter Feature 983
2. The display will show "LOG", enter your login password

a. If your company extensions are 2 digits long enter "120000"
b. If your company extensions are 3 digits long enter "1020000"
c. If your company extensions are 4 digits long enter "10020000"

3. Press the softkey under "OK"
To Create a New Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "ADD"
4. Enter the mailbox number (extension. you want to add
5. Mailbox type: Subscriber and then select "OK"
6. Extension: Usually the same as the mailbox number
7. Service Class: Enter 1
8. Name: Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma, and then enter the first name. When spelling the name, press # to move to the next character
9. Directory: Y (Yes.
10. Message Waiting: Y (Yes.
11. Out dial: Pool, enter 1 and then OK
12. Accept: 1, select OK

To Delete a Mailbox:
1. Log into the system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "DEL"
4. Enter the mailbox number (extension. you want to delete
5. Select the softkey under "Delete"

To Reset a Mailbox Password:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number you want to reset the password for
5. The display shows "Reset Password"
6. Select the softkey under "RESET"
7. Press the release key
*The new password will be "0000", the system will ask the user to change this the first time they log into their mailbox using this password.

To Change the Name on a Mailbox:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number (extension. you want to change the name on
5. The display shows "Reset Password"
6. Select the softkey under "Next", keep hitting "Next" until the display shows the name
7. Select the softkey under "Chng" to enter a new name
8. Enter the name using the dial pad. Enter last name first, press "# #" to enter a comma and then enter the first name. When spelling the name, press "#" to move to the next character
9. Select the softkey under "Next" to save the change
10. Hit the release button

To Change the "Recorded" Name for the Company Directory:
1. Have the Voicemail User log into their mailbox, after putting in their password, press the button under "Admin" (or press the number 8 key., and then press the number 1 key.
2. You will hear the old recorded name and then the system will "beep", prompting you to record a new name (name only here, not greeting..
3. Press "Ok" in the window when you are done recording and then "Ok" again to accept the recording

Apr 23, 2008 | NorStar M7310 Corded Phone

Not finding what you are looking for?
NEC Electra Elite DTU 16D-2 Corded Phone Logo

892 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Phones Experts

kakima

Level 3 Expert

96518 Answers

SC Spike

Level 1 Expert

90 Answers

Laxman Bisht
Laxman Bisht

Level 3 Expert

656 Answers

Are you a NEC Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...