Question about Xerox 5830 Copier

2 Answers

Dislplay reads "not ready"

I changed the dry ink - no help. Nothing in the manual about this problem. Have turned the machine on and off several times - no luck.

Posted by on

  • jeaboyrob Feb 12, 2009

    Thanks! After spending 35 minutes on the phone with Xerox tech support I was getting nowhere. Thanks to you, it's now up and running!

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

Try this reset.
Power the machine off, Hold "0" the zero key while powering the machine on. That will put it in diagnostics mode.
Then enter 20, press start, then enter 3 and start.
Power off and back on and let me know.

Posted on Feb 12, 2009

  • Rick Kasper Feb 12, 2009

    Your welcome.
    You may want to enter diagnostics again, press 0 and power on, And enter 10 and 65 and see where it is set. If the number is over 50, press zero and start to reset that counter.

    Glad to have helped.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 239 Answers

The side door sometimes will not close correctly, because the tab is worn out.
If you cannot afford to pay for the service call and parts, try using duct tape to hold the door closed. Often the mahine will say E7 to close the side door, and not ready.

Posted on Oct 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Hp Desk Jet 5652 printer. Black and color there are still ink left. Only blue and yellow prints on paper. I raced several times a cleaning program but nothing happens. Is there in printter some kind...


Hi
May be your late to refilled it and the ink dry
when that problem happened to me I put the ink in hot water
if the ink refill that's don't matter
try that and if that don't help you change the ink

Apr 25, 2011 | HP DeskJet 5652 InkJet Printer

1 Answer

HP 7780 suddenly stopped printing in red. I have changed the cartridges several times. I am using brand new HP cartridges. Have cleaned the print heads, aligned several times, nothing has heled. The...


Hi Good day!!!
Maybe your print head is clooged (red)
Then most about 98% are more likely to be an ink clog which just needs to be unclogged using something like print head cleaning solution
Basically, if a print head has been left unused for some time... moisture inside the ink begins to evaporate and instead of liquid ink, a thick inky jelly begins to form inside the print head.

When this occurs white lines appear in prints and most people not realizing the problem, will replace their inks... But when that does not work. Some assume they have an electrical fault, and replace their print head, others will replace their printer !

But provided there is no obvious print head damage? In 98% of cases it simply needs a little patience and print head cleaning solution injecting directly into the print head to dissolve the dried ink trapped inside. This will dissolve the clog and allow your expensive ink to flow once again. Most will then print as new.

Thank you for using fixya

Jan 03, 2011 | HP Printers & Copiers

1 Answer

Color Ink prints fine but Black ink will not print. Have replaced both black in cartridges and Cleaned several times. Have turned off printer and computer after cleaning. Nothing working.


You could clean the black ink cartridge. For this you need to remove the black ink cartridge which is present in the printer. In order to clean the laser or scanner block you could use a cotton swab as it would fully clean the dirt. You need to clean the grime and the dried ink present in the printer. This would remove all the hindrances which prevent the ink from flowing. Cleaning the printer heads would also help to solve the problem.

Nov 22, 2010 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Hello, I have a problem with my mp360 printer. I


Inkjet Printers dry out over time if they sit idol. Open the printer and remove the ink. Clean around the ink carriage and the under the ink with alcohol and a cotton swab. Pay special attention to areas with copper contacts. If the printer has a cleaning option either on the printer itself through the menu system or on the machine through the print driver, you can use that afterwards. Some printers will let you re-run the cleaning utility several times.

Nov 08, 2009 | Canon MultiPASS MP360 All-In-One InkJet...

1 Answer

Cannot put in my black ink into my epson stylus dx 6050


You can download the manual from here, which gives a full explanation on changing ink cartridges:

http://esupport.epson-europe.com/FileDetails.aspx?lng=en-GB&data=dkmEK02SU002FerSswuKrCsBh8QsoyzJb18U&id=8383

You can do it manually by turning on the printer, then, as soon as the print head starts to move, pull out the power cord from the printer, or switch off at the mains. The print head will now be free to move (carefully) by hand to the cartridge change position. Replace the cartridges and turn the printer back on. Carry out a cleaning cycle.

If the cartridges have been out for a while, you will no doubt have dried ink blocking the nozzles. Several cleaning cycles may be needed, or other methods, to clear the print nozzles. Report back if this is the case.

Remember in future not to remove a cartridge until you are ready to replace it.

Jan 31, 2009 | Epson Stylus Photo R200 InkJet Printer

1 Answer

Problems 4600


I'm sorry to say, but he is probably correct.  

Read these instructions for manually cleaning the heads.

http://www.fixya.com/support/t743789-printer_will_not_print_even_though

Mar 26, 2008 | Epson Stylus CX4600 All-In-One InkJet...

1 Answer

Not printing in color


Hi-

Chances are the tubes are clog and you need to dismantle the printer to clean it, if you have tried cleaning the heads several times then nothing change. Might as well have it service or buy a new one, call epson customer service- 562 276 4382 or 1300 so that they will offer you the loyalty website and you can get a new epson printer, discounted in price.

Hope this help

Nov 03, 2007 | Epson Stylus CX5400 All-In-One InkJet...

4 Answers

Dell 922 All In One Printer wont print


did you remove the seal of new catridge. bye

Sep 24, 2007 | Dell 922 All-In-One InkJet Printer

3 Answers

Canon bjc-80 - no print appears but cartridge & paper move normally


I had this problem too. It turned out there was old dry ink in there clogging up the printerhead and it was fixed after I ran the cleaning programme several times. However I can't for the lifeof me remember how to do that now. I know I found it online but it has since vanished. Maybe check your manual?

Nov 12, 2006 | Canon BJC 80 InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...