Question about GE 24 in. Monogram ZBD6880KSS Stainless Steel Built-in Dishwasher

1 Answer

Purchased a used Monogram Dishwasher/no factory info was included

We have a slightly used dishwasher (it looks new) that we still have not installed but would like to be sure that there was no recall on this particular model. Where is the serial number and model located?
It is a GE Monogram series with the large stainless steel front door and controls on the top of the door. When opening the door there are two thin stainless steel corner plates on the top upper insides, right and left. The only thing I could find wrong with this dishwasher is that the plate on the left side (looking into the unit) was removed and/or replaced as it has an appearance like it was crushed and reshaped to fit back in.
I'm guessing at the model number when I answer the question below, it possibly is the ZBD6880KSS, but as I mentioned earlier, I'm not sure.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 360 Answers

First, here are some tips to help with your model number: look for an aluminum tag--or a silver or white adhesive label. The model number may be printed or stamped onto the tag and it may be written in two different type sizes or styles. You might find the tag in one of these places:

  • Inside the door jamb, to the left, right, or top
  • On the door, to the left, right or top

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my dishwasher heating element turn on whenever I close the door--even when it is not running?


your timer is toast. this will repeat until you replace it or unhook the element, so don't use it until repaired. you should unhook from power as this is a very big fire hazzard

Oct 10, 2015 | GE Monogram® ZBD6880NSS Stainless Steel...

1 Answer

My dishes in the top rack don't get clean. The dishwasher is a ge monogram zbd6800kss. i believe the spray arm does not spray water to the top shelf. any help is appreciated


Hi tomcl244,

The spray arm may be clogged. Please look at my tip below on how to clean it, as well as nifty things to do to keep your Dishwasher running smoothly:

DISHWASHER NOT CLEANING PROPERLY...

Kind Regards :-)

If this solution helped you, please rate it

Jul 18, 2011 | GE Monogram ZBD6880K Dishwasher

1 Answer

I have to replace the handle / latch assembly on a GE Monogram Dishwasher Model #ZBD6600G03SS. For the love of me I can't see how to do it. Do I have to get at it from inside, outside, both sides...


Hi

If the dishwasher door will not latch on your GE Monogram dishwasher and it is a new appliance, check that the door is not hitting screws or cabinets underneath the counter. For a new dishwasher, you might also need to push in the top of the control panel as you latch the door. The new gaskets might not have had time to seat properly. It may be necessary to run up to 10 dishwasher cycles for the heat from the washer to seat the gasket, which becomes more flexible after it is used a few times. For older Monogram dishwashers, check the loading rack to be sure no dishes are protruding beyond the back or front of the racks and that no dishes have fallen through to the lower rack. If dishes are dangling down into the lower rack, they could stop the lower rack from completely rolling into the dishwasher and could also stop the spray arm from rotating. Check that no silverware is obstructing the door.

http://www.acmehowto.com/howto/appliance/dishwasher/check/doorlatch.php


Let us know if you have something more to know else accept the suggestion.
Thank You for contacting Fixya.com

Aug 03, 2010 | Dishwashers

1 Answer

MDBH985AWS, I just purchased new-er dishwasher


if you want to see what it looks like you can see a diagram at sears parts direct .com . let me know if this info was helpful

Feb 25, 2010 | Maytag MDBH985AWB / MDBH985AWS 24 in....

2 Answers

Just installed a brand new LG LDS4821St dishwasher. Washer will not drain. What do we do, no kink in hose


That's what factory warranty's are for, contact the place that you purchased it from or contact LG direct,
you paid for the warranty in the price of the dishwasher use it.

Good Luck !

Feb 21, 2010 | LG LDS4821ST Stainless Steel 24 in....

2 Answers

Ldf8812st lg dishwasher leaking from front door


Thank you for the update. The retrofit kit will probably not only fix your leak but also dry your dishes much better.

I hope the info I provided was useful. Can you take a moment to rate my level of helpfulness?

Mar 31, 2009 | LG 24 in. LDS 5811 Built-in Dishwasher

1 Answer

Hookup at water supply


I do believe so.  Check your installation guide for more info.  If you purchased a water line designed for dishwashers, it should have the 90º elbow included.

Apr 02, 2008 | LG LDF8812 Stainless Steel Built-in...

1 Answer

Dishwasher, whirlpool generation 2000+


not enough info. new house? newly purchased house? new dishwasher? newly installed?
check to see if water line was connected
see if a valve has been inserted in water line and is open
if fools day joke, thanks for my time.

Apr 01, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?

Open Questions:

See all GE 24 in. Monogram ZBD6880KSS Stainless Steel Questions

GE 24 in. Monogram ZBD6880KSS Stainless Steel Built-in Dishwasher Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike

Level 3 Expert

4332 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...