Question about Microsoft Windows Server Standard 2003 for PC

1 Answer

Ans go into u r mangage your server wizard then tray to install ad

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Hello,

this is not a sufficient to answer. but, you can get some idea in the following information:

if you have a plan to install AD:

  • install AD using manage your server wizard. (or)
  • install AD using DCPROMO command
After, you have to follow the AD installation instructions to store the ntds and sysvol files.

installing dns, is also need for a domain to adding clients.

after this, you can get your desired domain controller and active director users and computers information.

i think, this may be useful for you.

thanks,

Posted on Jul 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computer can's see Print Server in Add Printer Wizard The WGPS606 installation -- part 1 -- seemed to go fine. It sees our wireless network, we assigned it an IP address, it sees the printer connected to...


Make sure the printer has been connected locally first and that the print drivers have been installed. This should then allow you to add the printer via the set up.

Regards gaz

Sep 28, 2009 | NetGear WGPS606 (WGPS606NAR) Print Server

Tip

How to solve acces denied issue while adding printer in windows server 2008


You might have faced access denied issue while trying to add printers in windows server 2008 using add printer wizard.see the pic below<br /><br /><br /><br /><img src="vahiddhm_0.jpg" /><br /><br /><br />To solve this, Right click on Add printer and select Run as Administrator option<br /><br /><br /><br /><img src="vahiddhm_1.jpg" /><br /><br /><br />Now you can install printer without any issues.You need to chose either local printer or network printer and continue<br /><br /><img src="vahiddhm_2.jpg" />.<br /><br /><br /><br /><br /><br />

on Jan 19, 2011 | Computers & Internet

1 Answer

Can't select 'Bypass Tray' as a print option.


That's strange. I just downloaded it to see what might need to be done, and the bypass tray was available, and it's a standard feature, so it doesn't have to be manually added or anything. I, however, used the Ricoh driver which is identical, because Ricoh owns Gestetner (in case you didn't know) so you may try installing that one. maybe it's a glitch in the Gestetner driver package. The comparable model is Ricoh AP 4510, and you can get it here. I hope this helps:

http://www.ricoh-usa.com/downloads/downloads.asp?tsn=Ricoh-USA&path=http://support.ricoh.com/bb/html/dr_ut_e/rc2/model/p4510/p4510en.htm

Please rate me :)

May 27, 2009 | Toshiba Estudio 200L Copier

1 Answer

DHCP installation problem


First of all, read this M$ article on setting up DHCP: http://support.microsoft.com/kb/139904

Secondly, check the following:
1. You have defined a valid scope and ACTIVATED it
2. You have AUTHORISED the DCHP server in Active Directory (see http://technet.microsoft.com/en-us/library/cc759688(WS.10).aspx)
3. Make sure that there are enough unused IPs in the address pool
Make sure that the DHCP server service is running - and check the EVENT LOG for errors
4. Make sure that there is no other, especially unauthorized, DHCP servers (i.e. router with DHCP enabled)

Actually the best article overall to review is http://technet.microsoft.com/en-us/library/cc781697(WS.10).aspx, which gives a big picture view regarding the role of DHCP autorization and what can happen in a mixed environment

May 21, 2009 | Microsoft Windows Server 2003 Enterprise...

1 Answer

Netgear ps121 won't print


Possible reason why you cannot print with the print server is because the computer is not getting a valid IP from the router or a firewall is installed in the computer. You have to disable all firewalls installed in the computer.

For the print server setup, please follow the steps below:

Note: Before setting up the print server, make sure that you can print when printer is connected directly to the computer.

1. Wire the print server to router. Check the lights on it. It should have the ACT light on and the Error light off.

2. One way to test if the printer would work with the print server is to reset the print server for 3 to 5 seconds while it is powered on and after you release the button, the printer should automatically print the IP address of the print server.

Note: If the printer did not print, there is a possibility that they are not compatible. However, you may still continue to try to set up the print server.

3. Install the PS121 software.

a. Power on your computer, let the operating system boot up completely, and log in as needed.
b. Insert the Resource CD for the PS121 into your CD-ROM drive. The CD main page shown at the right will load.
c. Click Install Software.
d. Click Next and follow the software installation utility prompts to complete the software installation.
e. When prompted, restart your computer to complete the installation.
f. When your computer restarts, click Finish to run the Print Server Setup Wizard.

4. Run the Print Server Setup Wizard to Set Up a Fixed IP Address for the PS121.

a. The Print Server Setup Wizard screen should be displayed.
b. Click Next to proceed. The Print Server Wizard will now search your network for the PS121. If the Print Server Setup Wizard cannot find your PS121, check the network connections and status lights on the PS121.
c. The “Server Name” and the “IP Address” your network assigned to the PS121 are displayed. Click Next to proceed to the device name screen.
d. You can enter a descriptive Device Name and Domain Name or accept the defaults. Click Next to proceed to the IP Address configuration screen. The Print Server Wizard displays a recommended static IP address setting for the PS121. This is usually fine.
e. Click Next to proceed.
f. Click Finish to exit the Print Server Setup Wizard. This completes the configuration of the PS121 for operation on your network.
g. Click Yes to run the Add Printer Port Wizard. Follow the instructions in the next section for using the this wizard to set up each computer to use the PS121.

To set up each computer to use the PS121, please follow the instructions below:

1. Use the NETGEAR Add Printer Wizard to set up each PC to use the PS121.
a. When the Print Server Setup Wizard finishes, you are prompted to run the Add Printer Port Wizard. Click Yes to proceed. Alternatively, from the Windows Start menu NETGEAR Print Server program group, you can run the NETGEAR Add Printer Wizard.
b. After a short delay while the software searches the network for your PS121, the Printer Select window opens and displays the PS121 you have set up.
c. Click Next to proceed to the Port/Printer name screen. Take note of the printer model number listed.

2. Set up the correct printer driver for the printer port.
a. Click Next to proceed to the Port/Printer name screen. Take note of the printer model number listed.
b. Click Next to proceed to the Select Printer screen. If you see the exact printer model number listed as the printer model number from in the previous screen, click it to select it from the list.
c. If prompted, print a test page to verify operation of the printer and the PS121. Then, close any remaining Add Printer Port Wizard or Windows Add Printer Wizard windows.

Use the NETGEAR PS121 Mini Print Server Resource CD to run the Add Printer Port Wizard to set up each PC on you network that you want to use with the PS121. Select the port you added

You may also use the links below as your guide to troubleshoot the print server:

http://kbserver.netgear.com/kb_web_files/n101269.asp

http://kbserver.netgear.com/kb_web_files/n100033.asp

However, if this does not resolve the issue we will need to get some additional details from you to be able to assist you further. I have summarized my questions below:

1. Model number of router
2. Model of printer
3. Operating system of computer/s


May 01, 2009 | NetGear PS121 Print Server

2 Answers

Domain creation


Hai,
You go to this site tucktail.In that site U check your desired domain name available r not.And then register the domain name.

Jan 27, 2009 | Microsoft Windows Server Standard 2003 for...

1 Answer

Windows server


Hello,

my suggestion is: without ADS, we cannot create a domain server(till 2003 server). because, ADS is only known as Server and also it is the primary record for a domain creation.

we can go for installing ADS, by two methods.

1. using "dcpromo" command

2. Go to Administrative tools on the control panel. we can see the manage your server wizard. work with this.

we can install some services later, like dns,dhcp,ris. but ADS is the primary part.

bye,

Jan 27, 2009 | Microsoft Windows Server Standard 2003 for...

2 Answers

HOOKING UP A PRINTER TO NETWORK USING PRINT SERVER


before running the PS Wizard in Vista, right-click on the icon for PS Wizard and select "run as administrator". This will clear the bind errors and wrong segment errors many times - this only applies to vista.

Jul 25, 2008 | IOGear GPSU21 Print Server

2 Answers

Does IOGEAR GPSU21 work with Vista?


before running the PS Wizard in Vista, right-click on the icon for PS Wizard and select "run as administrator". This will clear the bind errors and wrong segment errors many times - this only applies to vista.

May 09, 2008 | IOGear GPSU21 Print Server

1 Answer

How To Configure FM114P or FR114P for an Internet Connection and Printer Sharing


There are three steps: 1. Configuring the router for Internet access 2. Installing and configuring the print server 3. Adding the printer to the Windows configuration To Configure the Router for Internet Access 1. Connect the modem to the router's Internet port and your LAN computers to the router's LAN ports. 2. Shut down your LAN computers. (Power them off.) 3. Power off the router. 4. Power off the modem. 5. Power on the modem. 6. Power on the router. 7. Start the LAN computers. 8. Enter 192.168.0.1 in a Web browser's address. 9. Type username and password (by default admin and password). 10. Click Setup Wizard to configure the router's Internet access. To Install and Configure the Print Server 1. Install the Printer Server Driver program on a computer. 2. After installation, make sure to select the Run Print Port Setup now box. 3. Click Finish. Print Port Setup runs, showing you the firewall and the printer. 4. Click Port 1. 5. Click Add. A pop-up message says whether a port was created, then the Add Printer wizard starts. To Add a Printer With the Windows Add Printer Wizard 1. Continuing from the last section (or clicking Start > Settings > Printers > Add Printer), click Next. 2. Select Network Printer, and click Next. 3. Click Next again (leaving the port as LPT1). 4. Select the manufacturer and printer model of your printer. (If your printer does not appear, you need to get the CD or floppy that came with the printer, and use Have Disk to specify the file location. Note that it is looking for a file that ends with .inf.) 5. Click Next. 6. Change the printer name to something users on your LAN will recognize easily. 7. If prompted by the Add Printer Wizard about sharing: DO NOT enable sharing! Now test the printer. Other information about Windows configuration is available in Windows help in the article "To connect to a printer on a network".

Feb 19, 2006 | NetGear FR114P Router

Not finding what you are looking for?
Microsoft Windows Server Standard 2003 for PC Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...