a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have a wireless router and it is connected to the DSLor cable modem then -
To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.
You will need to login to your wireless router to get the wireless password. You will need to know the username and password to the router in order to access this information. You will need to talk to the person who setup the router for the information. The router website will vary depending on the brand of the router. If you do not know the router username and password. You will want to contact the router manufacture for assistance acquiring that information.
Choose a convenient
location to begin installing your router, such as an open floor space or
table. This does not need to be the permanent location of the
router. For wireless routers, it may be necessary to re-position the
unit after installing it as the signals may not reach all areas needed.
Unplug the power to your Internet modem.
Power down your computer(s).
Plug the power in to your router.
Connect your Internet modem to the router. The cable plugs into the router jack named "WAN" or "Internet". Turn on your Modem.
Connect one computer to
the router. Even if the router is a wireless model, connect this first
computer to the router via a network cable.
Turn on the computer.
From the computer
connected to the router, open your web browser. Enter the router's
address, http://192.168.2.1, and press Enter on your keyboard.
Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
To configure the router
to connect to the Internet, you must enter information provided by
your Internet Service Provider (ISP) into the "Connection Type" section
in the left-hand column under the "Internet WAN" heading of the router's
configuration page. If using DSL Internet, you may need to enter the
PPPoE username and password. Likewise, if you have been issued a static IP address by your provider, the static IP fields (including network mask and gateway) must also must be set in the router.
If this is a wireless
router, change the network name (referred to as SSID). While the router
comes to you with a network name set at the factory, you may want to use
something more familiar for your network. Read Changing the router's wireless channel and SSID for a description of this process.
Plug the power back into your Internet modem.
Verify that this
computer can connect to the Internet properly. Open a new web browser
and visit a few Internet sites such as Google.com or Yahoo.com.
Finally, configure additional network security features as desired to guard your systems against Internet attackers.
If you need more help come back.Post / thumbs / testimonial are welcome!
I understand that you want to connect the PS3 using the Wireless card and NETGEAR card. Please note that the setup you have will not work for internet access. You can not configure the Air card to work with NETGEAR router. you need to have wih a broadband connection available for this router to connect to internet.
Once you have the router configured with Internet access then you may either connect the PS3 wired or wireless to the router, like you connect a desktop or laptop to the router.
1st you need to connect to the router with a PC to set up the internet connection. You will also need to configure Wireless passwords (assuming that you wish to connect wirelessly) I suggest that you use WAP as your security method. Once you have done this you will need to connect your kids pc's to the wireless network, This is done by entering the Wireless key you have just set up.
This is a very high level flyby. If you need further information let us know.
You need to cascade the Dlink wireless router to your RV042.
Suppose your RV042 has a default IP Address of 192.168.1.1, and the DLINK IP uses 192.168.0.1. Your Physical connection is from the regular port of the RV042 going to the WAN/Internet Port of the DLink wireless router.
Once you do that, your Dlink router should automatically obtain an IP from the main router. If it did, configure your wireless settings and you should be able to connect via wireless.
This is just one way to cascade your router to another router.
For more information, click here.