Question about Canon BubbleJet i560 InkJet Printer

4 Answers

The printer is telling me that the excess ink well is almost full

Can I find this and clean it out myself?

Posted by on

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 326 Answers

Yes.
u will have to open the printer with a screw driver and carefully remove the sides which are attached with internal clips.inside there will be sponge like material which collects the ink.just need to replace that or clean it with water and dry then and reinsert that sponge.

Posted on Feb 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 19,396 Answers

You need to reset the counter first.

Posted on Feb 12, 2009

  • Ginko
    Ginko Feb 12, 2009

    Follow the instructions here to reset the ink counter: I560 - FixYa.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6: Press Power to set data

Posted on Feb 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

This will handle that problem.
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
Please rate if works

Posted on Feb 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I unable to copy, it keep showing ink absorbers is full


Under your printer's print head, there is a compartment built to take up excess ink during normal operating. That message indicate that the compartment is full of waste ink. If you are good at fixing things , you can clean that bin, otherwise refer it to a service centre for cleaning.

Nov 09, 2015 | Office Equipment & Supplies

1 Answer

Epson artisan 710 end of life ink pad problem


you need to get it serviced. all printers have a pad that collects waste ink, like when you run a cleaning cycle. eventually the pad gets full and needs to be cleaned and/or replaced. you could try to take the printer apart and do it yourself but I believe you will still need a program to 'tell' the printer that a service has been carried out. never done it myself but there are videos on youtube that may help.

Dec 15, 2013 | Epson Stylus TX120 Inkjet Multifunction...

1 Answer

Ink absorber is full


Waste ink is full. The printer needs servicing. Can be done yourself, though EXTREMELY MESSY! And you'll need to find how to reset the counter, or just look here:

http://www.fixya.com/support/t1987764-canon_mx310_wase_ink_full_any_ideas

The waste ink pad is a huge and dirty job. It requires nearly full disassembly of the machine and full washing and drying of the waste ink pads. Resetting the counter without cleaning the pads will result in waste ink overflowing out of your printer and on to what ever the printer is on. As for printer disassembly, service manuals are not generally available for consumer grade machines, which means you're on your own. Having torn down many machine's myself I can tell you it takes time, patience and a good memory. Take good note of where everything came from and how it goes back together.

Apr 01, 2010 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Waste ink near full


waste ink is the container that collects excess ink during cleaning cycles.

mechanicla repair, if you can get your hands on the service manual you can replace it yourself.

otherwise just replace the printer.

Mar 24, 2010 | Office Equipment & Supplies

1 Answer

Tells me that the waste ink tray is getting full.How do i clean it myself


The tray sits under where the heads park and usually has a foam sponge that soaks up the ink. Fish the sponge out with tweezers or long nose pliers. Wear rubber gloves--the ink gets on everything. Either wash it out with detergent and hot water or buy a new one to replace it.

Aug 16, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

What is the wasted ink collector? A sentence appears when I try to print out a page. It tells me that the collector for the wasted ink is nearly full.


there is a waste ink tank that stores excess ink from the printing process.

it is almost full and would need to be cleaned or replaced. and then the printer needs to be reset. Recommend Canon service for that problem, there are instructions for it posted online if you care to look around.

Jul 13, 2009 | Canon PIXMA MP170 All-In-One InkJet...

1 Answer

Waste tank is full, How do fix it, can I clean it myself?


Inkjet printers have a fibrous pad inside them that collects the waste ink from cleaning the print head. Over time, this pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink full" error.

Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you. Once they are replaced, it'll be functional again.

May 15, 2009 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

Waste ink near full message


Take paper towels and absorb the excess ink. Make sure that the electricial contact  that tell it is full are clean.

Dec 27, 2008 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

I get an error message on Canon i960 printer that tells me the waste ink tank full. How can I empty this myself?


Read it all here.
Scroll about half the page, to:
WASTE TANK ALMOST FULL or FULL ERROR MESSAGE PROBLEMThere is explained how to get rid of the error message very easy, and how to clean the waste ink pad manually. The latter seems not to be necessary, though.

Mar 27, 2008 | Computers & Internet

Not finding what you are looking for?
Canon BubbleJet i560 InkJet Printer Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98766 Answers

old marine
old marine

Level 3 Expert

1571 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...