Question about Mitsubishi WS-65513 65" Rear Projection HDTV

1 Answer

NEEDS HARD RESET EVERYTIME TO TURN ON

I did the cap fix, and it worked for a few days, then it wont turn on at all.
I need to do a hard reset every day. and the cc stays on in the HD mode.
it will not let me courser over to turn it off.

Thanks for any assistance!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 184 Answers

The capacitors are not all that's involved in this issue. You may have to replace the "DM" board and the E2P board. The captioning is likely being produced by your HD cablebox. Have the cable company come out and disable the function through the service menu in the box.

michtech

Posted on Feb 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everytime i turn the playstation 3 on the screen says can not read hard drive and wont reset or turn off


The harddrive in your ps3 has died. Unfortunately the only way to fix this is to replace it. Any 2.5inch harddrive will do. Installation instructions below:

Mar 20, 2011 | Sony Playstation 3 (PS3) Console

2 Answers

My Sansa Fuze 4gb wont turn on and isnt being recognized by my computer, iv also tried to soft reset it many times , nothing seems to work.. help plz..


I've had the same problem with my Sansa Fuze 2GB. It's pretty frustrating, but in order to get it to work, I let it sit without touching it or doing anything with it for a few days. For 2-5 days, do not turn on your Sansa Fuze. After the amount of time has passed, try the soft reset again.

Apr 22, 2010 | SanDisk Sansa Fuze MP3 Player

1 Answer

I have an black one and everytime I turn it on its asking for an password and I don't know it


Hello guccimane04,

A hard reset will unlock the Palm Centro But it will ERASE ALL of your data. If you choose to do a hard reset, the following procedure will work:

• Remove the battery cover on the back of the Palm Centro
• Remove the battery for a few minutes
• Press the power button when Reinserting the battery
• Release the power button after the Palm logo displays on the screen
* The hard reset erases all your data ! (Run a hotsync to retore the data) *

If this solution is helpful please click 'YES' by 'Was this helpful?' below.

Have a great day,
martyshaw152

Jan 20, 2010 | AT&T Palm Centro Cell Phone - White

1 Answer

My palm pilot m515 wont turn on or charge


try turning it on while its on the charger .. if that works then you might need a new battery .. if it doesnt then do a "reset" ... unscrew the top off the stylus and use it to push the reset button on the back (top center) ... if that doesnt get it going then you can do a hard reset but that will erase all your information (like telephone numbers and such) ... you do a hard reset by holding down the on/off button while pushing the reset .. if it works on the charger but quits when on battery then you need a new battery ..

Jun 27, 2009 | Palm m515 Handheld

1 Answer

I turn on my ds and it works for a little bit then freeses


Hi,

If this happens everytime, the unit needs to have a hard reset or firmware reload. you have to take it to a service shop.

I hope it helps

Jun 19, 2009 | Nintendo DS Lite Console

1 Answer

Samsung i9oo Omnia wont turn back on


There is a JTag Tool Exist for such problems and it is the only way !
You can find at : www.omnia-repair.com
Or you can also send them to repair your phone ..

Best Regards

Jan 06, 2009 | Samsung SGH-i900 Omnia Unlocked Cellular...

5 Answers

MITSUBISHI 65 INCH HDTV, GREEN LIGHT BLINKING, WILL NOT POWER UP


There are four (4) caps on the 'DM' board that need to replaced. Parts: 680ufd 16 volts, orig are rated at 1,000 ufd.

Nov 01, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

My mio p350 was playing up. it then hard reset it self. it came back on line and was working for a few minutes then stalled. i soft reset it and now it will not come back. it stays on the first page...


Mio P350/550 Hard Reset 1. Turn off the pocket pc (on/off button ).
2. Push the joystick button up (to the screen).
3. Turn on the pocket pc.
4. keep holding on the joystick button for 30 second.

Oct 30, 2008 | Computers & Internet

3 Answers

It Wont Scroll, Help!


This happened to me before. What I did was that I found the little reset button and pressed it and I then turned the player back on and It worked normally again. Hope this helps P.S: The scroll buttons may be broken.

Mar 30, 2007 | Samsung Yepp YP-Z5QB MP3 Player

Not finding what you are looking for?
Mitsubishi WS-65513 65" Rear Projection HDTV Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

71705 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...