Question about Philips 42PF9630A 42 in. Plasma Television

1 Answer

Philips 42pf9631d TV will Not Turn on. Red Light blinks.

Red light on the front of the TV Blinks and TV will not turn on. If I unplug then plug it back in it works fine. But this happen every time I trune the TV off. What can I do? Also will this casuse worse damage if I keep using?

Posted by on

  • njg42 Feb 15, 2009

    Lawrence1974
    Thank you for the quick responce. I unplugged the TV over night and when I turned the TV on in the morning it was ok. So I am not sure how many times it blinks. Hopefully it fixed itself. Either way I will let you know if it happens again and how many times it blinks. Please check back so I can let you what happens.



    Thanks A Million

    Nick

  • njg42 Feb 16, 2009

    It did it again. It blinks 6 times then stops for a second then 6 times then stops then blinks 6 times again.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 138 Answers

How many times is the led flashing or is it flashing???

Posted on Feb 14, 2009

  • Lawrence Smith Feb 16, 2009

    The problem is the Small signal board or the power supply. the voltages on the power supply will need to be checked. the voltages are located on the inside of the set. If anyvoltage are missing the problem is the power board. You may want to have a tech come and look at it and if he have any questions on what to do just put the question in hear and I will help him with any questions he have.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv wont turn on, just red light blinks


From the owner's manual of that model:
If a red light is blinking on the front of the TV, the set has entered protection mode. If this happens it usually means you simplyneed to reset the TV. Unplug the TV for 60 seconds. Then plug the TV in and try to switch it on. If the light is still blinking red,call the Customer Care Center at 1-800-531-0039

Dec 08, 2011 | Philips 55PL9524 55" Rear Projection...

1 Answer

When I turn my TV on it wont come on and it just blinks a red light on the front,


Tries unplug,replug it back about an hour later,let the tv reset itself,see if that work.Not,than the tv power supply board is the cause.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Sep 26, 2010 | Philips 42PF9631D 42 in. Plasma Television

2 Answers

Blinking red light and tv will not turn on.


problem on power supply , u may have 2 bAD capacitor

Apr 14, 2010 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

My plasma philips tv dosent turn on and red light blinks 6 times


Power supply board have dead capacitors.U know how to solder?Replaced these capacitors that bulge up,puff up or burst open.Should get ur power back.Or replaced a whole power refurbish power supply buy it at Shopjimmy.com,Ebay.com.

Feb 06, 2010 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

Philips 42pf9631d/37 6 slow red flashes and 3 fast


6-7 blinks means there is an issue with the power supply...
I found a replacement for my 42pf9631d/37
Part # Lj44-00117A
at TSM Inc. for $110.95 with free shipping...
http://www.tristatemodule.com/p-10120-lj44-00117a-samsung-tv-module-power-supply.aspx

Jan 28, 2010 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

Red light blinking


You have a bad main board most likely. You can try unpluging it for 5 minutes.

Sep 03, 2009 | Philips 42PF9631D 42 in. Plasma Television

1 Answer

Red blinking light


need make and model numbers to find out what it is

Aug 25, 2009 | Philips 42PF9631D 42 in. Plasma Television

2 Answers

TV will not turn on, the light goes from green to red.


I own the same model. You have 1-2 Blown Capacitors. Take off the back cover, And look towards the center of the main power board. Look towards the center of this, and there are 2 capacitors side by side. You should see them swollen at the tops, even maybe a little black residue that has come out. I soldered on 2 new ones, and bingo! I would suggest replacing them both.

Dec 13, 2008 | Philips 42PF9631D 42 in. Plasma Television

Not finding what you are looking for?
Philips 42PF9630A 42 in. Plasma Television Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72271 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...